DeWalt 550 specifications Connecting and Disconnecting the Drive System to the Model

Page 11

Model 550 Tube Severing Tool

Select the proper Tri Tool Inc. Drive Unit that best suits the operation needed to be performed.

Drive Input Location

A non Tri Tool Inc. Drive Unit will void the warranty.

NOTE:

If input is counterclockwise, sever damage will occur during cutting.

CONNECTING AND DISCONNECTING THE DRIVE SYSTEM TO THE MODEL 550

The entire series of Model 550 Tube Cutters are equipped with a quick disconnect drive-mounting system.

The drive units, which are equipped with a mating quick disconnect, are universal, they will operate with any Model 550 size that is selected.

! WARNING !

Disconnect the Drive Unit from its power source when installing or removing it from the Model 550 Tub Cutter otherwise serious injury may occur.

To connect an air or electric drive unit, simply align the slots of the drive system to the pin located inside the Model 550 coupling, push the drive system inward and rotate counterclockwise and release.

The drive unit is equipped with a spring to allow it to lock securely.

The drive unit should now be locked in place.

Align the slot.

The rotation direction of the input must be clockwise.

92-0116 : Rev. 060810

11

Image 11

Contents Rev Model 550 Tube Severing Tool Page General Safety PrecautionsTRI Tool INC Tool Care Model 550 Tube Severing Tool General Description Specifications Model Tube Weight Size Maintenance Model Tube Aluminum Stainless Titanium OperationConnecting and Disconnecting the Drive System to the Model TRI Tool INC Replacement of the Cutter Wheel Repairs and ReplacementTRI Tool INC Removal of a Sheared Roll PIN from the Drive Assy AIR Drive AssemblyProblem The Tool Bit Chatters Trouble ShootingProblem There is a loss of air power Accessories Illustrated Parts Breakdown Part Description Qty Parts List, Model 550-03, Tube Cutter P/NParts List, Model 550-04, Tube Cutter P/N Parts List, Model 550-05, Tube Cutter P/N Parts List, Model 550-06, Tube Cutter P/N TRI Tool INC Model 550-08 Tube Severing Tool Assembly P/N HOUSING, Tube Cutter Parts List, Model 550-08, Tube Cutter P/NModel 550-10, 12, 14 Parts List, Model 550-10, Tube Cutter P/N Parts List, Model 550-12, Tube Cutter P/N Parts List, Model 550-14, Tube Cutter P/N Parts List, Model 550-16, Tube Cutter P/N Model 550-18, 20, 24 and 28 Tube Severing Tool Assembly Parts List, Model 550-18, Tube Cutter P/N Parts List, Model 550-20, Tube Cutter P/N Parts List, Model 550-24, Tube Cutter P/N Parts List, Model 550-28, Tube Cutter P/N TRI Tool INC Model 550-32 Tube Severing Tool P/N Parts List, Model 550-32, Tube Cutter P/N TRI Tool INC Tube Cutter Drive Assembly P/N Parts List, Drive Assembly, Tube Cutter P/N Motor ASSEMBLY, CORDLESS, 14.4V 550 P/N Parts List, A10 Tool Kit not Shown Parts List, B1 Tool Kit not Shown Dewalt Safety Instructions