DeWalt 550 specifications Problem There is a loss of air power

Page 17

Model 550 Tube Severing Tool

Problem: The tool holder is not feeding

Probable causes:

The feed pin is broken or out of position.

The feed sprocket shear pin is broken.

The feed screw is stripped.

The feed nut is stripped.

The slide rails are too tight.

Problem: There is a loss of air power

Probable causes:

The air supply pressure is too low.

The air filter is plugged.

The air line size is insufficient.

The air line is too long.

Problem: There is a loss of hydraulic power

Probable causes:

The hydraulic supply pressure is too low.

The hydraulic filter is plugged.

The hydraulic line size is insufficient.

The hydraulic line is too long.

Problem: The tool bit will not reach the work

Probable causes:

Incorrect tool blocks are installed for the size of the pipe or tube being worked on.

Incorrect tool bit is installed.

Problem: The hydraulic motor will not start

Probable causes:

The hydraulic power supply is shut off.

The hydraulic motor is damaged and will not run free.

92-0116 : Rev. 060810

17

Image 17

Contents Rev Model 550 Tube Severing Tool Page General Safety PrecautionsTRI Tool INC Tool Care Model 550 Tube Severing Tool General Description Specifications Model Tube Weight Size Maintenance Model Tube Aluminum Stainless Titanium OperationConnecting and Disconnecting the Drive System to the Model TRI Tool INC Replacement of the Cutter Wheel Repairs and ReplacementTRI Tool INC Removal of a Sheared Roll PIN from the Drive Assy AIR Drive AssemblyProblem The Tool Bit Chatters Trouble ShootingProblem There is a loss of air power Accessories Illustrated Parts Breakdown Part Description Qty Parts List, Model 550-03, Tube Cutter P/NParts List, Model 550-04, Tube Cutter P/N Parts List, Model 550-05, Tube Cutter P/N Parts List, Model 550-06, Tube Cutter P/N TRI Tool INC Model 550-08 Tube Severing Tool Assembly P/N HOUSING, Tube Cutter Parts List, Model 550-08, Tube Cutter P/NModel 550-10, 12, 14 Parts List, Model 550-10, Tube Cutter P/N Parts List, Model 550-12, Tube Cutter P/N Parts List, Model 550-14, Tube Cutter P/N Parts List, Model 550-16, Tube Cutter P/N Model 550-18, 20, 24 and 28 Tube Severing Tool Assembly Parts List, Model 550-18, Tube Cutter P/N Parts List, Model 550-20, Tube Cutter P/N Parts List, Model 550-24, Tube Cutter P/N Parts List, Model 550-28, Tube Cutter P/N TRI Tool INC Model 550-32 Tube Severing Tool P/N Parts List, Model 550-32, Tube Cutter P/N TRI Tool INC Tube Cutter Drive Assembly P/N Parts List, Drive Assembly, Tube Cutter P/N Motor ASSEMBLY, CORDLESS, 14.4V 550 P/N Parts List, A10 Tool Kit not Shown Parts List, B1 Tool Kit not Shown Dewalt Safety Instructions