DeWalt 550 specifications Trouble Shooting, Problem The Tool Bit Chatters

Page 16

TRI TOOL INC.

TROUBLE SHOOTING

Problem: The Tool Bit Chatters

Probable causes:

The tool bit is loose or overextended.

The tool bit is damaged.

The tool holder is too loose in the slides.

The cutting speed is too fast.

The clamping pads are loose on the pipe or tube.

Cutting fluid is required.

The main bearing pre-load is loose.

Problem: There is excessive Tool Bit wear

Probable causes:

The pipe or tube material is too hard or abrasive. The cutting speed is too fast.

Cutting fluid is required.

A dull Tool Bit is causing surface hardening conditions (Stainless pipe or tubing).

There is scale or other foreign matter on the pipe or tube, which is dulling the tool bit at the start of the cut.

The tool bit is incorrect for the material being cut.

Problem: The surface finish is rough

Probable causes:

The tool bit is dull, chipped, etc.

Metal build-up on the cutting edge of the tool bit is creating a false cutting edge.

Cutting fluid is required.

16	92-0116 : Rev. 060810

Image 16

Contents Rev Model 550 Tube Severing Tool Page Safety Precautions GeneralTRI Tool INC Tool Care Model 550 Tube Severing Tool General Description Specifications Model Tube Weight Size Maintenance Operation Model Tube Aluminum Stainless TitaniumConnecting and Disconnecting the Drive System to the Model TRI Tool INC Repairs and Replacement Replacement of the Cutter WheelTRI Tool INC AIR Drive Assembly Removal of a Sheared Roll PIN from the Drive AssyTrouble Shooting Problem The Tool Bit ChattersProblem There is a loss of air power Accessories Illustrated Parts Breakdown Parts List, Model 550-03, Tube Cutter P/N Part Description QtyParts List, Model 550-04, Tube Cutter P/N Parts List, Model 550-05, Tube Cutter P/N Parts List, Model 550-06, Tube Cutter P/N TRI Tool INC Model 550-08 Tube Severing Tool Assembly P/N Parts List, Model 550-08, Tube Cutter P/N HOUSING, Tube CutterModel 550-10, 12, 14 Parts List, Model 550-10, Tube Cutter P/N Parts List, Model 550-12, Tube Cutter P/N Parts List, Model 550-14, Tube Cutter P/N Parts List, Model 550-16, Tube Cutter P/N Model 550-18, 20, 24 and 28 Tube Severing Tool Assembly Parts List, Model 550-18, Tube Cutter P/N Parts List, Model 550-20, Tube Cutter P/N Parts List, Model 550-24, Tube Cutter P/N Parts List, Model 550-28, Tube Cutter P/N TRI Tool INC Model 550-32 Tube Severing Tool P/N Parts List, Model 550-32, Tube Cutter P/N TRI Tool INC Tube Cutter Drive Assembly P/N Parts List, Drive Assembly, Tube Cutter P/N Motor ASSEMBLY, CORDLESS, 14.4V 550 P/N Parts List, A10 Tool Kit not Shown Parts List, B1 Tool Kit not Shown Dewalt Safety Instructions