Deﬁnitions Safety Guidelines, Work Area Safety

English

Deﬁnitions: Safety Guidelines

The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols.

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

NOTICE: indicates a practice not related to personal injury which, if not avoided, may result in property damage.

WARNING: To reduce the risk of injury, read the instruction manual.

General Power Tool Safety Warnings

WARNING! Read all safety warnings and all instructions Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

SAVE ALL WARNINGS AND INSTRUCTIONS

FOR FUTURE REFERENCE

The term “power tool”in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

1)WORK AREA SAFETY

a)Keep work area clean and well lit. Cluttered or dark areas invite accidents.

b)Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

c)Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2)ELECTRICAL SAFETY

a)Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

b)Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

c)Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

d)Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

e)When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

f)If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

3)PERSONAL SAFETY

a)Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

b)Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non- skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

DW515K, DW505 specifications

The DeWalt DW505 and DW515K are two power-packed tools designed to meet the needs of both professional tradespeople and DIY enthusiasts. Built for performance and durability, these hammer drills are perfect for a variety of applications, from drilling into concrete to driving screws into tough materials.

The DeWalt DW505 is a versatile, 7.8-amp hammer drill, featuring a two-speed gearbox that allows users to operate at speeds of 0-1,100 and 0-3,000 RPM. This ranges of speed is ideal for a diverse range of projects. The DW505's variable-speed trigger enables better control over the drilling process, while the 1/2-inch ratcheting keyless chuck ensures secure bit retention, making bit changes fast and easy.

Key technologies in the DW505 include an impact mechanism that provides powerful hammering action, making it possible to drill into tougher materials such as masonry. Its ergonomic design ensures user comfort during extended use, while the side handle provides added control, making this drill suitable for heavy-duty tasks.

On the other hand, the DeWalt DW515K is a 1/2-inch reversible hammer drill kit, designed to excel in both drilling and chiseling tasks. With a power output of 8.0 amps and a considerable impact energy, the DW515K stands out in terms of perforation capabilities. Its dual-mode operation allows it to transition from rotary drilling to hammer drilling effortlessly. This flexibility is essential for tackling a variety of materials, including wood, metal, and concrete.

The DW515K also incorporates a keyless chuck that simplifies bit changes, making it convenient for work applications where time is of the essence. Additionally, the drill features rubber overmold grips for increased comfort and control, ensuring that fatigue is minimized even during rigorous jobs.

Both models are built with durability in mind, featuring high-quality materials that can withstand the rigors of demanding job sites. The compact design of the DW505 and DW515K makes them easy to maneuver in tight spaces, while their robust construction enhances their reliability for long-term use.

In summary, the DeWalt DW505 and DW515K hammer drills stand out due to their powerful performance, versatile features, and user-friendly designs. From contractors to DIY enthusiasts, these tools deliver the reliability and efficiency needed for any drilling task.