DeWalt DW505, DW515K instruction manual Voltage Volts Total length of cord in meters m

Page 14

Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

Wear safety goggles or other eye protection. Drilling operations cause chips to fly. Flying particles can cause permanent eye damage.

Bits and tools get hot during operation. Wear gloves when touching them.

Keep handles dry, clean, free from oil and grease. it is recommended to use rubber gloves. This will enable better control of the tool.

An extension cord must have adequate wire size for safety. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. When using more than one extension to make up the total length, be sure each individual extension contains at least the minimum wire size. The following table shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord.

 

 

Voltage (Volts)

Total length of cord in meters (m)

 

 

 

 

 

 

 

 

 

 

 

120–127V

0–7

 

7–15

15–30

 

30–50

 

 

220–240V

0–15

 

15–30

30–60

 

60–100

 

 

 

 

 

 

 

 

 

 

Rated Ampere

Minimal cross-sectional area of the

 

 

range

 

cord in meters (mm2 )

 

English

 

12–16A

2.5

 

4.0

Not Recommended

 

 

0–6A

1.0

 

1.5

1.5

 

2.5

 

 

6–10A

1.0

 

1.5

2.5

 

4.0

 

 

10–12A

1.5

 

1.5

2.5

 

4.0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WARNING: ALWAYS USE SAFETY GLASSES. Everyday eyeglasses are NOT safety glasses. Also use face or dust mask if cutting operation is dusty. All users and bystanders MUST ALWAYS wear certified safety equipment:

ANSI Z87.1 eye protection (CAN/CSA Z94.3),

ANSI S12.6 (S3.19) hearing protection,

NIOSH/OSHA/MSHA respiratory protection.

WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

lead from lead-based paints,

crystalline silica from bricks and cement and other masonry products, and

arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and other construction activities. Wear protective clothing and wash exposed areas with soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin may promote absorption of harmful chemicals.

WARNING: Use of this tool can generate and/or disburse dust, which may cause serious and permanent respiratory or other injury. Always use NIOSH/OSHA approved respiratory protection appropriate for the dust exposure. Direct particles away from face and body.

WARNING: Always wear proper personal hearing protection that conforms to ANSI S12.6 (S3.19) during use. Under some conditions and duration of use, noise from this product may contribute to hearing loss.

14

Image 14
Contents Page Page Seguridad Eléctrica Definiciones Normas de seguridadSeguridad DEL Área DE Trabajo Seguridad Personal USO Y Mantenimiento DE LA Herramienta EléctricaNormas Específicas DE Seguridad MantenimientoTensión Voltios Longitud del cable en metros m Agarradera lateral Fig Interruptor FigPalanca DE Cambio DE Marcha Operación a velocidad alta o baja FigVelocidad Variable Funcionamiento Selector del modo de martillo o de taladro FigPortabrocas TaladradoLubricación Varilla de profundidadMantenimiento LimpiezaProtección del Medio Ambiente Compra de accesoriosReparaciones Capacidades Máximas RecomendadasWork Area Safety Definitions Safety GuidelinesGeneral Power Tool Safety Warnings Electrical SafetyPower Tool USE and Care ServiceVoltage Volts Total length of cord in meters m Side Handle Fig For Future USE Assembly and AdjustmentsSwitch Fig Variable Speed High/Low Speed Operation FigHammer/Drill Selector Fig Reversing LeverDrilling ChuckOperation Depth Rod MaintenanceCleaning Purchasing Accessories LubricationMaximum Recommended Capacities RepairsProtecting the Environment Page Page NOV11 Part No. N142137 DW505
Related manuals
Manual 7 pages 49.97 Kb

DW515K, DW505 specifications

The DeWalt DW505 and DW515K are two power-packed tools designed to meet the needs of both professional tradespeople and DIY enthusiasts. Built for performance and durability, these hammer drills are perfect for a variety of applications, from drilling into concrete to driving screws into tough materials.

The DeWalt DW505 is a versatile, 7.8-amp hammer drill, featuring a two-speed gearbox that allows users to operate at speeds of 0-1,100 and 0-3,000 RPM. This ranges of speed is ideal for a diverse range of projects. The DW505's variable-speed trigger enables better control over the drilling process, while the 1/2-inch ratcheting keyless chuck ensures secure bit retention, making bit changes fast and easy.

Key technologies in the DW505 include an impact mechanism that provides powerful hammering action, making it possible to drill into tougher materials such as masonry. Its ergonomic design ensures user comfort during extended use, while the side handle provides added control, making this drill suitable for heavy-duty tasks.

On the other hand, the DeWalt DW515K is a 1/2-inch reversible hammer drill kit, designed to excel in both drilling and chiseling tasks. With a power output of 8.0 amps and a considerable impact energy, the DW515K stands out in terms of perforation capabilities. Its dual-mode operation allows it to transition from rotary drilling to hammer drilling effortlessly. This flexibility is essential for tackling a variety of materials, including wood, metal, and concrete.

The DW515K also incorporates a keyless chuck that simplifies bit changes, making it convenient for work applications where time is of the essence. Additionally, the drill features rubber overmold grips for increased comfort and control, ensuring that fatigue is minimized even during rigorous jobs.

Both models are built with durability in mind, featuring high-quality materials that can withstand the rigors of demanding job sites. The compact design of the DW505 and DW515K makes them easy to maneuver in tight spaces, while their robust construction enhances their reliability for long-term use.

In summary, the DeWalt DW505 and DW515K hammer drills stand out due to their powerful performance, versatile features, and user-friendly designs. From contractors to DIY enthusiasts, these tools deliver the reliability and efficiency needed for any drilling task.