002590
12
011750
1.Brush holder cap
2.Screwdriver
Immerse the dressing stone in water for 2 or 3 minutes before sharpening. Hold the holder so that the both blades contact the dressing stone for simultaneous sharpening at the same angle.
Replacing carbon brushes
1. Limit mark
1
001145
Remove and check the carbon brushes regularly. Replace when they wear down to the limit mark. Keep the carbon brushes clean and free to slip in the holders. Both carbon brushes should be replaced at the same time. Use only identical carbon brushes.
1 |
| 1. | Chip cover |
| 2. | Screwdriver | |
| 2 |
|
|
|
|
|
|
011749
1 |
| 1. | Nozzle |
| 2. | Screwdriver | |
|
| ||
| 2 |
|
|
|
|
|
|
011753
Use a screwdriver to remove the chip cover or nozzle.
Use a screwdriver to remove the brush holder caps. Take out the worn carbon brushes, insert the new ones and secure the brush holder caps.
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized Service Centers, always using Makita replacement parts.
OPTIONAL ACCESSORIES
CAUTION:
• These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
If you need any assistance for more details regarding these accessories, ask your local Makita Service Center.
•
•
•Mini planer blade
•Sharpening holder assembly
•Blade gauge
•Set plate set
•Edge fence (Guide rule)
•Extension guide set
•Dressing stone
•Nozzle
•Dust bag assembly
•Elbow
•Socket wrench
•Plastic carrying case
•Various type of Makita genuine batteries and chargers
NOTE:
•Some items in the list may be included in the tool package as standard accessories. They may differ from country to country.
12