ENGLISH (Original instructions)
SPECIFICATIONS
Model | BKP140 |
| BKP180 | |
Planing width |
|
| 82 mm | |
Planing depth | 1.6 mm |
|
| 2 mm |
Shiplapping depth |
|
| 9 mm | |
No load speed | 13,000 |
|
| 14,000 |
Overall length | 329 mm |
| 333 mm | |
Net weight | 3.3 kg |
|
| 3.4 kg |
Rated voltage | D.C. 14.4 | V |
| D.C. 18 V |
•Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
•Specifications and battery cartridge may differ from country to country.
•Weight, with battery cartridge, according to
Symbols
The following show the symbols used for the equipment. Be sure that you understand their meaning before use. 
･ Read instruction manual.
Cd | ･ Only for EU countries |
|
Do not dispose of electric equipment or | ||
| battery pack together with household | |
| waste material! |
|
| In observance of European Directive | |
| 2002/96/EC on waste electric and | |
| electronic equipment, 2006/66/EC | on |
| batteries and accumulators and waste | |
| batteries and accumulators and their | |
| implementation in accordance | with |
| national laws, electric equipment and | |
| battery pack that have reached the end | |
| of their life must be collected separately | |
and returned to an environmentally compatible recycling facility.
Intended use
The tool is intended for planing wood.
Noise
The typical
Model BKP140
Sound pressure level (LpA) : 80 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Model BKP180
Sound pressure level (LpA) : 84 dB(A)
Sound power level (LWA) : 95 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total value
Model BKP140
Work mode : planing softwood
Vibration emission (ah) : 3.5 m/s2
Uncertainty (K) : 1.5 m/s2
Model BKP180
Work mode : planing softwood
Vibration emission (ah) : 4.5 m/s2
Uncertainty (K) : 1.5 m/s2
•The declared vibration emission value has been measured in accordance with the standard test method and may be used for comparing one tool with another.
•The declared vibration emission value may also be used in a preliminary assessment of exposure.
WARNING:
•The vibration emission during actual use of the power tool can differ from the declared emission value depending on the ways in which the tool is used.
•Be sure to identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time).
2