SAVING, LOADING AND CANCELING AUDIO/VIDEO SETTINGS
You can register 2 sets of audio, video and display mode settings.
Registering
1 Select SAVE•LOAD in the MENU screen.
After adjusting the audio/video settings and selecting the display mode, rotate the jog dial to select SAVE•LOAD and press it to select OK.
* The display mode can be registered as well.
On-Screen Display
M E N U
E X I T
V I D E O S E T T I N G S
A U D I O S E T T I N G S
S A V E • L O A D
S E L E C T
O K
ENGLISH
2 Select SAVE.
1. Rotate the jog dial to select either SAVE 1 or SAVE 2 and press it to select OK.
2. The settings are registered.
*Select EXIT to return to the MENU screen.
*The new settings are saved over the previous ones.
S A V E • L O A D
E X I T |
|
S A V E | 1 |
S A V E | 2 |
L O A D | 1 |
L O A D | 2 |
S E L E C T | O K |
Loading
1 Select SAVE•LOAD in the MENU screen.
2 Select LOAD.
Rotate the jog dial to select either LOAD 1 or LOAD 2 and press it to select OK.
*The settings will change to those loaded.
*Select LOAD 1 when loading the settings for SAVE 1, and select LOAD 2 when loading the settings for SAVE 2.
S A V E • L O A D
E X I T |
|
S A V E | 1 |
S A V E | 2 |
L O A D | 1 |
L O A D | 2 |
S E L E C T | O K |
Resetting (For canceling all the registered settings)
Press the POWER switch for more than 5 seconds with the jog dial pressed. The power will be
turned off once the POWER switch is released. When the power is turned on again, all the settings will return to the factory default settings.
The password setting returns to 
. Refer to Registering, Changing or Canceling the Password on pg. 28.