FP0 PROFIBUS DP Slave or Remote I/O Unit
For Cost Eff ec tive Control of Distribut ed Field Device
The FP0 DPS2 can operate either as a DP Slave module or as a remote I/O system to which different decentralised inputs and outputs can be connected. A DIP switch can be used to switch between the two modes:
Mode 1:
DP Slave module. Connect the FP0 or FPΣ (Sigma) CPU + expansion modules to the PROFIBUS network.
Mode 2:
Remote I/O. Connect up to three expansion modules without CPU to the
PROFIBUS network.
In remote I/O mode, the unit can be connected to any PLC which offers a
PROFIBUS communication interface, making it totally independent of
Panasonic PLCs.
FP0-DPS specifications
Item |
| Description |
| |
Type designation |
| FP0 DP Slave unit, Ord. No. FP0DPS2 |
| |
PROFIBUS standards complied with | EN 50170, DIN 19245 Part 1 and Part 3 |
| ||
Baud rates |
| 9.6 / 19.2 / 93.75 / 187.5 / 500 / 1,500 / 3,000 / 6,000 / 12,000 Kbaud | ||
| automatic baud rate detection | |||
|
| |||
Range of addresses that can be set | 0..125 |
| ||
PROFIBUS connection |
|
| ||
Configuration | 2 words input / 2 words output, up to 6 words input / 6 words output if no other expansion is connected |
| ||
Remote I/O | Remote I/O, max. 3 FP0 expansion units |
| ||
| ||||
FP0 communication |
| Via FP0 system bus |
| |
Power supply |
| 24VDC (21.6VDC … 26.4VDC) | ||
Max. power consumption |
| 100mA |
| |
FP2 DP or FMS Master
FP0 DP Slave | FP (Sigma) DP Slave |
|
|
DP Slave Remote I/O | DP Slave Remote I/O Configuration |
Configuration with digital I/O | with analogue I/O up to 12 outputs |
up to 96 transistor I/O or up to | or 24 analogue inputs or up to 24 |
48 relay I/O are possible | thermocouple inputs are possible |
| Specially by developed software tools ensure |
| easy configuration and |
PLC | products. |
(Master) |
|
|
|
PLC
(Slave)
PROFIBUS
Remote I/O
(Slave)
10 | 07/2007 |
|