Panasonic FP0-C10RS, FP0T32CP, FP0-C16T, E32T Power Supplies, Performance specifications, Standards

FP0 Series

Power Supplies

Features

■Small size:

-FP0 power supply: 90 x 60 x 30.4mm

-FP power supply: 115 x 75 x 42mm

■Maximum output current:

-FP0 power supply: 0.7A (24VDC)

-FP power supply: 2.1A (24VDC)

■ Multiple voltage input:	■ Global approvals
85 to 265VAC	(UL/cUL, EN, CE-marking)
■ Optimal protection:	■ DIN-rail mounting
overvoltage, overcurrent,	(FP0 power supply also side
overheating, etc.	mounting)

➝ 30.4mm ➝

➝

90mm

➝

FP0 Power Supply

FP0-PSA2

➝ 42mm ➝

➝

115mm

➝

FP Power Supply

FP-PS24-050 E

Notes:

•Mounting distance between the FP0 pow- er supply and the FP0 CPU is needed to permit heat radiation for the FP0-CPU

•For side mounting, 2 additional

blue clips are needed: order part-no. 677-021-17101 (1pce.) for FP0-PSA2

•Mounting distance between the power supply FP-PS24-050E and other devices

is needed for cooling/heat radiation.

Performance specifications

Order number:	FP0-PSA2		FP-PS24-050E
Primary side:
Rated operating voltage	115/230VAC
Operating voltage range	85 to 265VAC
Rated operating frequency	50/60Hz
Operating frequency range	40 to 70Hz
Inrush current	< 50A at 55°C		< 50A at 25°C/< 70A at 55°C
Current consumption	145mA (at 230VAC and 0.7A output current)		400mA (at 230VAC and 2.1A output current)
Over voltage protection	PROTECTED
Secondary side:
Rated output voltage	24VDC
Output voltage range	23.5V to 24.5VDC
Nominal output current	0.7A		2.1A
Output current range	0 to 0.7A		0 to 2.1A
Output ripple	< 60mVpp		< 240mVpp
Short circuit protected	Electronic, automatic restart mode		Continuous
Over voltage protected		Yes
Over load protected	Yes (switch off at approx. 0.8A and more)		Yes (switch off at approx. 3.5A and more)
Holding time	Min. 20ms at 230VAC		Min. 110ms at 230VAC
Power OK signal	–		Yes
General specifications
Ambient temperature	0°C to +55°C
Storage temperature	-20°C to +70°C
Ambient humidity	5 to 85% non-condensing
Storage humidity	5 to 85% non-condensing
Vibration resistance	10 to 55Hz, 1 cycle/min.: double amplitude of 0.75mm, 10 min. on 3 axes
Shock resistance	10g min., 4 times on 3 axes
Life time min.	7 years at nom. load, 25°C ambient temperature,
	20000 h at 55°C with full load/continuous operation
Mounting	DIN rail or FP0 flat attachement plate		DIN rail
Size	90 x 60 x 30.4mm		115 x 75 x 42mm
Input connection AC side	MC connector, 2 pin		2 pin
Output connection DC side	MC connector, 6 pin, 3 pin for „+“ and 3 pin for „-“		5 pin, 2 pin for „+” and 2 pin for „-”; 1 pin Power OK
Status display	LED (green) at the front side for the secondary voltage indication
Standards
EMC	EN 50082-2, EN50082-1,		EN 55011/B, EN 55022/B,
	EN 50081-2, EN 50081-1		EN 61000-4-2, -4-3, -4-4, -4-5, -4-6, -4-11
LVD	EN 60950, EN 50178		EN 60950, EN 50178
	(overvoltage category 3)		(overvoltage category 2)
Others	UL Recognized according		to UL 508, UL 1950,
	cUL Recognized according to CAN/CSA-C22.2 No. 950.95
Protection	IP30		IP20 outside/IP67 inside

26 07/2007