Panasonic E8RS, FP0T32CP, FP0-C16T, E32RS Interfaces, Input specifications, Output specifications

FP0 Series

Specifica tion Tables

Interfaces

Item	Description
Programming TOOL port	RS232, mini DIN socket (5 pin), 9600 or 19200 BAUD, (8 data bits, odd parity, 1 stop bit), Computer link for pro-
	gramming and communication with MEWTOCOL-COM, user configurable modem connection
	RS232 (SD, RD, GND) 3 way screw terminal, 300 to 19200 BAUD, (7 or 8 data bits, none/even/odd parity,
Communication COM port	1 or 2 stop bits, start code: none/STX, end code: CR/CR+LF/ETX/none, CCU mode for programming and com-
	munication with MEWTOCOL.COM, user configurable modem connection, GENERAL PURPOSE MODE control-
	led by programme for general purpose RS232 communication

Input specifications

Item		Description
Insulation method		Optical coupler
Rated input voltage		24VDC
Operating voltage range		21.6 to 26.4VDC
Rated input current		4.3mA or less (at 24VDC)
Input points per common		6 points/common (C10RS) 8 points/common (C14RS,C16T/C16P,E16T/E16P) 16 points/common (C32T/C32P,E32T/E32P)
ON voltage/ON current		19.2V or less/ 3mA or less
OFF voltage/OFF current		2.4V or more/ 1mA or more
Input impedance		Approx. 5.6kΩ
		50µs or less (at X0,X1) *
	OFF➔ ON	100µs or less (at X2 to X5)
Response time		2ms or less (at X6 to XF)
	ON➔ OFF	Same as above
Operating indicator		LED display

*: Since the response time of X0 to X5 is very fast (for high-speed counter input), the FP0 happens to catch chattering noise as an input signal. To prevent this, it is recommended that timer instruction should be included in the programme.

Output specifications

1) Relay output type

Item		Description
Output type		Normally open (1 Form A)
Rated control capacity		2A 250VAC, 2A 30VDC (4.5A/common)
Response time	OFF➔ ON	10ms or less
	ON➔ OFF	8ms or less
Life	Mechanical	20million operations or more
	Electrical	100k operations or more
Surge absorber		None
Operation indicator		LED display

The FP0 series conforms to the following standards under the EMC Directive and the Low Voltage Directive.

EMC Directive (89/336/EEC)	Low Voltage Directive (73/23/EEC)
EN 50081-2: 1993	VDE 0160: 1988 (EN 50178: 1995)
EN 50082-2: 1995	(Overvoltage Category II,
	non-mains-circuit, pollution degree 2)
	EN 61131-2: 1995

2) Transistor output type

Item			Description
Insulation method			Optical coupler
Output type			Open collector
Rated load voltage			24VDC 5 to 24VDC
Load voltage allowable range			4.75 to 26.4VDC
Max. load current			0.1A/points (at DC26.4V) (1A/common) 1
Max. inrush current			0.3A
Leakage current at OFF time			100µA or less
Max. voltage down at ON time			1.5V or less
External power		Voltage	21.6 to 26.4VDC
supply		Current	240mA or less
(For internal circuit)
Response time	OFF➔ ON		1ms or less
	ON➔ OFF		1ms or less 2
Surge absorber			Zener diode
Operating indicator			LED display

1: 8 points / common (C16T/C16P,E16T/E16P), 16 points / common (C32T/C32P, T32CP, E32T/E32P)

2: 50µs or less at Y0, Y1 only

18 07/2007