Philips HTS3532 warranty Radio, MP3 player, Create MP3 f les, Musical slideshow, Tuning grid

Page 14

Musical slideshow

If the picture and audio files are from the same disc or USB storage device, you can create a musical slideshow.

1

Select an audio track and then press OK.

2

Press

BACK and then go to the picture

3

folder.

 

Select a picture and then press OK to start

4

the slideshow.

Press

 

to stop slideshow.

 

5

Press

 

again to stop music.

 

Radio

Listen to FM radio on your home theater, and store up to 40 radio stations.

Note

• AM and digital radio are not supported.

• If no stereo signal is detected, or if fewer than five stations are found, you are prompted to install the radio stations again.

1 Extend the FM antenna at the back of your home theater and place it away from the TV or other sources of radiation.

2 Press RADIO.

»If you have already installed the radio stations, the last channel that you listened to is played.

»If you have not installed any radio stations, the message AUTO INSTALL...PRESS PLAY appears on the display panel. press .

3Use the remote control to listen or to change radio stations.

Button Action

Numeric Select a preset radio station. buttons,

/

Navigation Left/Right: Search for a radio

buttons station.

Up/Down: Fine tune a radio frequency.

Press to stop the installation of radio stations.

Press and hold to erase the preset radio station.

PROGRAM Manual:

1)Press PROGRAM. 2) Press / to select your preset. 3) Press PROGRAM again to store the radio station.

Automatic: Press and hold for three seconds to reinstall the radio stations.

Tuning grid

In some countries, you can toggle the FM tuning grid between 50 kHz and 100 kHz. Switching the tuning grid erases all preset radio stations.

1

Press RADIO.

 

2

Press

 

.

 

 

 

3

Press and hold

(Play/Pause) to toggle

between 50 kHz or 100 kHz.

MP3 player

Connect a MP3 player to play audio files. What you need

An MP3 player.

A 3.5mm stereo audio cable.

1 Using the 3.5mm stereo audio cable, connect the MP3 player to the MUSIC iLINK connector on your home theater.

2 Press SOURCE repeatedly until MUSIC I-LINK appears on the display panel.

3 Press the buttons on the MP3 player to select and play audio files.

Create MP3 f les

Use your home theater to convert audio CDs into MP3 files.

What you need

An audio disc.

A USB storage device.

12EN

Image 14
Contents HTS3532 Page Contents Safety Risk of electric shock or f reHelp and support Care for your productCare of the environment Front connectors ConnectorsRear connectors Your home theaterRemote control BackConnect and set up Connect speakersOption 2 Connect to the TV through composite video Connect to TVOption 1 Connect to TV through standard Hdmi Connect audio from TV and other devices Set up speakersSet up EasyLink HDMI-CEC control Option 1 Connect audio through a digital optical cableDiscs Enable EasyLinkUse your home Theater EasyLink controlsSubtitles Data f lesSynchronize picture and sound VOD code for DivXAudio options USB storage devicesAudio, video, and picture options Video optionsMP3 player Tuning gridRadio Create MP3 f lesChoose sound Sound modeSurround sound mode Picture and video settings Change settingsLanguage settings Audio settingsUpdate software Region codes Update the softwareDownload the latest software Media formatsAudio Remote control batteriesVideo RadioSound TroubleshootingPicture PlayCopyright TrademarksIndex HDMI-CECEnglish Philips Electronics India Limited Language Code