Philips HTS3532 Download the latest software, Update the software, Region codes, Media formats

Step 1: Download the latest software

1Connect a USB flash drive to your computer.

2 In your web browser, go to www.philips.com/

3	support.
	At the Philips Support website, find your
	product and locate the Software and drivers.
	» The software update is available as a zip
4	file.
	Save the zip file in the root directory of your
5	USB flash drive.
	Use the archive utility to extract the software
6	update file in the root directory.
	Disconnect the USB flash drive from your

computer.

Step 2: Update the software

Caution

• Do not switch off the home theater or remove the USB flash drive during the update.

1 Connect the USB flash drive containing the downloaded file to your home theater.

• Make sure that the disc compartment is closed and there is no disc inside.

2 Switch your TV to the correct source for your home theater.

3 Follow the onscreen instructions to confirm the update.

» Once complete, the home theater automatically switches off and restarts. If it does not, disconnect the power cord for a few seconds and then reconnect it.

7Product specifications

Note

•Specifications and design are subject to change without notice.

Region codes

The type plate on the back or bottom of the home theater shows which regions it supports.

CountryDVD

Europe, United Kingdom

Russia, India

Media formats

•DVD-Video, DVD+R/+RW, DVD-R/-RW, DVD+R/-R DL, CD-R/CD-RW, Audio CD, Video CD/SVCD, Picture files, MP3 media, WMA media, DivX media, USB storage device

File formats

•Audio: .mp3, .wma

•Video: .avi, .divx, .mpg, .mpeg,

•Picture: .jpg, .jpeg

Amplif er

•Total output power: 300W RMS (30% THD)

•Frequency response: 20 Hz-20 kHz / ±3 dB

•Signal-to-noise ratio: > 65 dB (CCIR) / (A-weighted)

•Input sensitivity:

•AUX: 2 V

•Music iLink: 1 V

16EN