5Change settings
The home theater settings are already configured for optimal performance. Unless you have a reason to change a setting, we recommend that you keep the default setting.
Note
•You cannot change a setting that is grayed out.
•To return to the previous menu, press 
BACK.To exit the menu, press 
SETUP.
Language settings
Onscreen display language
1 Press 
SETUP.
2 Select [General Setup] and then press OK.
• [OSD Language]: Select a display language for menu.
Disc language
1 Press 
SETUP.
2 Select [Preference Setup] and then press OK.
• [Audio]: Select an audio language for discs.
• [Subtitle]: Select a subtitle language for discs.
• [Disc Menu]: Select a menu language for discs.
Note
•If your preferred disc language is not available, select [Others] from the list, and enter the
•If you select a language that is not available on a disc, the home theater uses the default language of the disc.
Picture and video settings
1 | Press SETUP. |
2 | Select [Video Setup] and then press OK. |
• [TV System]: Select a video format supported by the TV.
• [TV Display]: Select a picture format to fit the TV screen.
• [HDMI Setup]: [Wide Screen Format]: For 16:9 wide screen TV display setting. [HDMI Video]: Select the resolution of the video signal being output from the
HDMI OUT.
• [Picture Settings]: Select color settings for the video display on TV.
• [HD JPEG]: Enable or disable high definition picture display.
Note
•If you change a setting, make sure that the TV supports the new setting.
Audio settings
1 Press 
SETUP.
2 Select [Audio Setup] and then press OK.
• [HDMI Audio]: HDMI audio is automatically
Parental control settings
Password and Ratings
1 | Press SETUP. |
2 | Select [Preference Setup] and then press OK. |
• [Password]: Set or change your password for parental control access. If you do not have a password or have forgotten your password, enter 0000.
• [Parental]: Enable
14EN