TV |
Connect audio from TV and other devices
Play audio from TV or other devices through your home theater speakers.
Use the best quality connection available on your TV, home theater, and other devices.
Note
•The audio connections in this user manual are only recommendations.You can use other connections too.
.
Option 1: Connect audio through a digital optical cable
Best quality audio
1Using an optical cable, connect the OPTICAL connector on your home theater to the OPTICAL OUT connector on the TV or other device.
•The digital optical connector might be labeled SPDIF or SPDIF OUT.
TV |
8EN
Option 2: Connect audio through analog audio cables
Basic quality audio
1Using an analog cable, connect the AUX connectors on your home theater to the AUDIO OUT connectors on the TV or other device.
VCR |
Set up speakers
Set up the speakers manually to experience customized surround sound.
Before you start
Make the necessary connections described in the quick start guide, and then switch the TV to the correct source for your home theater.
1 Press 
SETUP on your home theater remote control.
2 Select [Audio Setup] and then press OK.
3 Press the Navigation buttons and OK to select and change:
• [Speakers Volume]: Set the volume level of each speaker.
• [Speakers Delay]: Set the delay time for speakers which are placed closer to the seating position in order to obtain equal audio transmission from all the speakers.
Set up EasyLink (HDMI-CEC control)
This home theater supports Philips EasyLink, which uses the