Installation
Precautions
●Before removing, turn the main power of the unit off.
●When installing or removing the terminal board, exercise care to avoid injury.
There may be some
●When installing the board, fully insert the Board into the slot horizontally until it is firmly plugged into the connector.
Note that incomplete insertion may damage the internal components.
■Compatible slot: SLOT1, SLOT2, SLOT3
■Installation Procedure
1Turn off the display and the connected equipment, and disconnect the power supply plugs from the wall sockets.
Disconnect all cables connected to the unit.
2Follow the procedure below and install the terminal board in the display.
To install
1. Remove the slot cover. | 2. Insert the terminal board until it is | 3. Affix | the terminal function | ||||
| firmly plugged into the connector. | label (included). | |||||
Securing screw | Tighten screws in the order | 1 | - | 4 | . |
|
|
2
1 |
4 | 3 |
|
•Make sure that the Board does not ride on the two lower claws.
•Be sure to fasten all screws tightly.
•Have the customer keep the removed Terminal Board for future servicing needs.
To remove
Foam mat or thick soft cloth Remove the screws. Grip the handle of the terminal board, and slowly pull out in the
direction of the arrow.
English
3