Vista 32 Addendum
4.You will see the screen below.. Click on Allow..
5.Once initialization has finished, the SGC2910 Wireless PC Controller’ Install Wizard screen will appear.
6.After reading the notice, press the ‘NEXT’ button to begin the software installation.. You should now see the screen indicating that the software is being installed on your system..
7.Note: During installation of Windows Vista the following Windows security message will appear: “Windows can’t verify the publisher of this driver software”.. Please click “Install this driver software anyway”..
8.In Windows Vista the SGC2910 Wireless PC Controller should be connected to your Computer before beginning software installation.. If the SGC2910 is not connected to your PC, the following message will appear “Please Plug into the Wireless PC Controller”.. If this message appears, plug the controller in to your computer.. You may need to wait a few seconds for Windows to load the HID drivers.. Once completed, you can click the “OK” button..
EN EN
27