Installation
8.In Windows XP and Windows 2000, the SGC2910 Wireless PC Controller should be connected to your PC before beginning software installation.. If the SGC2910 is not connected to your PC, the following warning message will appear.. If this message appears, you must connect the SGC2910 Wireless PC Controller to the computer..You may need to wait a few seconds for Windows to load the HID drivers.. Once completed, you can click the “OK” button..
9.When the PC detects the SGC2910 Wireless PC Controller, the following message will appear and ask you to disconnect the controller.. Once you have disconnected the SGC2910, you should click the ‘OK’ button.. If the message reappears you should wait several seconds and then click the ‘OK’ button.. Some PCs require several seconds to detect the SGC2910 as disconnected..
EN EN