Kramer Electronics Controlling the VP-419xl, Controlling via the Front Panel Buttons

Controlling the VP-419xl

6 Controlling the VP-419xl

The VP-419xlcan be controlled directly via the front panel buttons (see section

6￿ .1), via the OSD menu (see section 6￿ .2), and/or remotely from the infra-red remote control transmitter (see section 6￿ .3).

6.1 Controlling via the Front Panel Buttons

The VP-419xlincludes the following control front panel buttons:

￿An RGB/RESET button for setting the output to either RGB or Y, Pb, Pr or resetting1 the resolution to VGA or 480p

￿CONTROL buttons, including the MENU, ENTER, + and ± buttons

￿INPUT SELECTOR buttons for selecting the required input (CV, YC, COMP. or SXGA)

6.2Using the CONTROL Buttons

The CONTROL buttons let you control the VP-419xlvia the OSD menu

￿Press the MENU button to enter the menu2

￿Press the ENTER button to accept changes and to change the menu settings

￿Press the + and ± buttons to move through the OSD menu, which is displayed on the video output, or adjust the PICTURE parameters

On the OSD menu, select EXIT to exit the menu.

6.2.1The MAIN MENU

Table 4 defines the MAIN MENU features and functions.

	Table 4: The MAIN MENU Features
Mode	Function
PICTURE	Set the picture parameters (contrast, brightness, color, hue, detail and reset), see
	section 6￿ .2.2
SOURCE	Select the desired input source: video, s-Video, Y, CB, CR or computer
RESOLUTION	After selecting the output type3, select between the RGB output resolutions (VGA,
	SVGA, XGA or SXGA) or the YPbPr output resolutions (480p, 576p, 720p or 1080i)
SETUP	Select the aspect, output, 3D enhance, digital NR, display and HV output (see section
	6￿ .2.3)
INFORMATION	Displays the source, resolution and software version
EXIT	Select to exit the menu

1 Press for 3 seconds to reset to VGA and press for 10 seconds to reset to 480p 2 The menu times out after 8 seconds

3 By pressing the RGB/RESET button or via the OSD menu

8 KRAMER: SIMPLE CREATIVE TECHNOLOGY