Kramer Electronics user manual Overview, VP-419xlVideo To SXGA/HD Scaler also features

Overview

3Overview

The Kramer VP-419xlVideo To SXGA/HD Scaler is a high quality converter for up-scaling composite video, s-Video (YC), and SD component video to XGA1 and HD resolutions. It also has a computer graphics (XGA) input, which – when selected, or when the machine is not powered - is routed directly (bypassed) to the output. Video inputs are de-interlaced and scaled to the selected PC or HDTV resolutions, as follows:

￿	VGA (640x480)	￿	SXGA (1280x1024)	￿	720p
￿	SVGA (800x600)	￿	480p	￿	1080i
￿	XGA (1024x768)	￿	576p

The VP-419xlVideo To SXGA/HD Scaler also features:

￿Automatic detection of NTSC, PAL-B, PAL-G, PAL-I, PAL-D, and SECAM video standards

￿An On-Screen Display (OSD) for easy setup and adjustment, accessible via the IR remote control and via the front-panel buttons

￿A high-performance adaptive 3D comb filter (for precise color management)

￿Per-pixel motion compensated de-interlacing for artifact-free video images

￿Automatic detection for 3:2 pulldown for 24fps film source material

￿Frame rate conversion of 50Hz to 60Hz for PAL input signals

￿A Vertical Temporal (VT) Filter for removing jagged artifacts

￿Advanced color/luminance transient improvement circuitry

￿A PC Input connector for easy integration into an existing system

￿A built-in procamp for convenient signal adjustment

￿A non-volatile memory that retains the last settings used

The machine is fed from an external 12V DC source, making it suitable for field operation.

Control your VP-419xl:

￿Directly, via the front panel push buttons

￿Remotely, from the infra-red remote control transmitter

1 The terminology XGA is used throughout this manual, where this implies any RGBHV signal on an HD15 connector having a resolution from VGA up to SXGA

3