HD15 Pinout for HD3, Signal | Kramer Electronics VP-419xl specs

5Connecting the VP-419xl Video to SXGA/HD Scaler

Connect1 your VP-419xl, as illustrated in the example in Figure 2:

1.Connect an s-Video source (for example, an s-Video camcorder) to the YC INPUT 4p connector.

2.Connect a composite video source (for example, a composite video player) to the CV INPUT RCA connector.

3.Connect a component video source (for example, a DVD player) to the Y, Cb and Cr INPUT RCA connectors.

4.Connect an SXGA graphics source to the SXGA PASS INPUT HD15 connector2.

5.Connect the SXGA/HD OUT HD15 connector to a video acceptor (for example, a plasma display) as follows:

When connecting to an XGA acceptor (RGBHV), then connect to the acceptor’s XGA connector

When connecting to a component acceptor (Y, Cb, Cr), then connect as shown in Table 3

PIN #

1Cr

3Cb

6.Connect the 12V DC power adapter to the power socket and connect the adapter to the mains electricity (not shown in Figure 2).

1 You do not have to connect all the inputs, connect only those that are required

2 This PC input signal is not scaled, but is available for pass-through when the PC Source is selected

3 The PINOUT should be: PIN 1 = Cr, PIN 2 = Y and PIN 3 = Cb (with pins 6, 7 and 8 as ground respectively)

6	KRAMER: SIMPLE CREATIVE TECHNOLOGY