Kramer Electronics VP-419xl Picture Menu Features, Setup Menu Features, Parameter Function

Controlling the VP-419xl

6.2.2The PICTURE Menu

Table 5 defines the PICTURE menu.

Table 5: The PICTURE Menu Features

Parameter	Function	Range	Default
CONTRAST	Adjust the contrast	From 0 to 63	58
BRIGHT	Adjust the brightness	From 0 to 63	31
COLOR	Adjust the color	From 0 to 63	31
HUE	Adjust the hue	From 0 to 63	31
DETAIL	Adjust the sharpness	From 0 to 63	10
RESET	Select RESET and press ENTER to reset to the default parameters
EXIT	Select to exit to the MAIN MENU

6.2.3The SETUP Menu

Table 6 defines the SETUP menu.

	Table 6: The SETUP Menu Features
Parameter	Function
ASPECT1	Select between STANDARD, 4:3 and 16:9
OUTPUT	Select a PC (RGB) output or an HDTV (Y, Pb, Pr) output
3D ENHANCE	Turn the 3D comb filter function ON or OFF2
DIGITAL NR	Turn the digital noise reduction function ON or OFF
DISPLAY	Set to ON to display the input standard and the output resolution on the screen all the time
	Set to INFO to briefly display the input standard and the output resolution on the screen
	after a change is made
	Otherwise, set to OFF
HV OUTPUT	Select ON to send H and V synchronization when Y, Pb, Pr is selected for the output3
EXIT	Select to exit to the MAIN MENU

1 STANDARD will output the signal in the same aspect ratio as the input aspect ratio. 4:3 and 16:9 will always output as 4:3 and 16:9 respectively, regardless of the input aspect ratio

2 When a video player or a non-standard video source is connected to the input, the output picture may jitter. If this occurs, turn the 3D Comb Filter to OFF

3 H and V are always sent when RGB is selected at the output

9