Sharp AY-X28NCJ, AY-X24NCJ, AY-X12NCJ, AY-X09NCJ Care and Cleaning, Cleaning the Front Panel

Page 10

Care and Cleaning

Disconnect the power supply at the circuit breaker before cleaning and maintenance.

Do not splash water on the units for cleaning, as electric shocks may occur.

Wipe the unit with a dry soft cloth, or a cloth slightly moistened with water or cleaner (not with volatile liquid such as thinner, petrol or mineral spirits).

Cleaning the Front Panel

Remove the front panel. Dip a piece of cloth into the water, cooler than 45°Cand squeeze it. Wipe the front panel.

Note: Do not immerse the front panel into water so as to protect microcomputer components and circuit diagram on the front panel.

Cleaning the Air Filter (every 3 months)

Note: Do not to touch the fin of indoor unit during cleaning to avoid personal injury.

(1) Take down the air filter

Lift up the front panel unclip and pull the air filter downwards to take it off, as shown in Fig (a, b)

(2) Clean the air filter

Use a vacuum cleaner to remove dust.

If the filter is dirty, wash with warm water and mild detergent. Dry the filters in the shade.

Note: Never use water above 45°C to clean the air filter or it can cause deformation or discolouration.

(3) Reinstall the air filter

Reinstall the filters along the direction of arrowhead and re-clip. Close the panel.

Check before use

(1)Be sure that nothing obstructs the air outlet and inlet.

(2)Check if the batteries of the remote control need to be replaced.

(3)Check if the installation stand of the outdoor unit is damaged or not. If damaged, please report to a licensed contractor.

Maintenance after use

(1)Switch off the power supply.

(2)Clean the filters, inlets and outlets of the indoor and outdoor units.

(3)Clear any obstructions such as build up of vegetation, leaves or debris from outdoor unit.

10

Image 10
Contents Split Type Inverter Room Air Conditioner Contents Please read the following carefully before operating Name of parts Sleep button ON/OFF buttonFAN button Operation of wireless remote control con’t Temp button Feel buttonTemp Range Cool Mode Heat Mode Sleep Introduction of Special FunctionChanging batteries and notices Emergency OperationCleaning the Front Panel Care and CleaningCleaning the Air Filter every 3 months Phenomenon Troubleshooting TroubleshootingPlease Note Operation Tips Installation Site of Indoor Unit Installation Site InstructionsInstallation Site of Outdoor Unit Safety Precautions for Electric Appliances Earthing RequirementsInstallation Drawing Installation of Drain Hose Installation of Indoor UnitDrill Piping Hole Connecting Indoor and Outdoor Electric Wires Installation of Indoor Unit con’tInstallation of Connection Pipe Air Purging and Leakage Test Installation of Outdoor UnitElectric Wiring Outdoor Condensate Drainage only for Heat pump unitCheck after Installation Check after Installation and Operation TestOperation Test Specifications Cooling HeatingAC12RNSYS AC18RNSYS AC24RNSYS AC28RNSYS Page Page Page N 003 039

AE-X12NCJ, AE-X28NCJ, AE-X09NCJ, AE-X18NCJ, AE-X24NCJ specifications

The Sharp AY-X12NCJ, AE-X18NCJ, AY-X28NCJ, and AY-X18NCJ, AE-X28NCJ models are remarkable air conditioning units designed to provide efficient cooling and heating solutions for various spaces. These units combine advanced technology and user-friendly features that cater to the needs of residential and commercial environments.

One of the standout features of these models is the incorporation of Plasmacluster Ion Technology, which helps to purify the air by generating positive and negative ions. This technology effectively eliminates bacteria, viruses, and allergens from the air, promoting a healthier indoor environment. The air purification feature is particularly beneficial for individuals with allergies or respiratory issues, as it continuously improves air quality.

Additionally, the Sharp AY-X and AE-X series is equipped with inverter technology, allowing for variable speed operation. This technology ensures that the compressor runs at different speeds tailored to the desired temperature setting, leading to significant energy savings. Inverter systems not only enhance energy efficiency but also provide a quieter operation, creating a more comfortable atmosphere without the disruptive noise often associated with traditional air conditioners.

Another notable characteristic is the modification of the cooling and heating modes. These units come with several modes that can be adjusted based on user preferences, such as turbo cooling for rapid temperature adjustment or sleep mode that gradually adjusts the temperature for optimal comfort during the night.

Moreover, the Sharp AY-X and AE-X series includes smart features such as remote control capabilities, allowing users to set and modify settings from a distance. This convenience is especially advantageous for busy individuals who want to come home to a pre-cooled or heated space without the hassle of manual adjustments.

Energy efficiency is further enhanced by the use of R32 refrigerant, which has a lower global warming potential compared to traditional refrigerants. This environmentally friendly refrigerant not only contributes to reducing energy consumption but also aligns with global initiatives to promote sustainability.

Overall, the Sharp AY-X12NCJ, AE-X18NCJ, AY-X28NCJ, AY-X18NCJ, and AE-X28NCJ models are designed for those seeking reliable, efficient, and advanced air conditioning solutions. With features that promote air quality, energy efficiency, and user convenience, these units stand out in the competitive market of HVAC systems.