Cyclone MKV 2 Multimedia Adapter
Select “Infrastructure (AP)”, this will cause the Cyclone MKV 2 to perform a scan for wireless networks within its range. Networks that the player has detected will display their network names (SSID) along with their security protocols, such as WEP, WPA and WPA2. The signal strength of each network will also be displayed.
Select the name of your network and press OK.
If your network is protected by a security password, an onscreen keyboard will appear allowing you to enter the required password.
Enter the network security password and press OK.
Once this is done the Cyclone MKV 2 will begin its Connection Testing mode. This mode will attempt to acquire an IP Address and connect you to your network.
Once the player has finished acquiring an IP Address a Test OK screen will appear displaying information such as IP Address, Subnet Mask and Gateway, amongst others.
You have now successfully connected to your local wireless network.