Double click on Keyboard #00
Installing the APPLICADS Drivers
Keyboard #00 Properties will be displayed as shown below:
When Windows is started up you will see an information bubble
If the ACPI Multiprocessor is installed you will be prompted to restart.
When your computer restarts, you will need to go into “Device Manager”. You can do this by clicking on the Start Task bar
This will bring you to the System properties. Click on the Hardware tab, and then click on the “Device Manager” button.
From drop-down menu, select Station 1:
In “Device Manager”, check to make sure HT is enabled by scrolling down the list to “Processors.” click the on the + . If HT was enabled correctly you will see the same processor appear twice, as shown below.
Next, system will install Radeon drivers, as shown below.