Installing or removing the battery

Insert and click the battery into place, then close the telephone cover. Unclip the cover, then remove the battery.

Charging the battery

Connect the battery charger

Charging may take about 20 minutes to start if the battery is flat.

Be careful not to force the plug into the socket.

Make sure the battery is correctly inserted before connecting the charger.

The mains socket must be near to the phone and easily accessible (avoid electric extension cables).

19

When using your telephone for the first time, charge the battery fully (approximately 3 hours). You are advised to fully charge the battery ( ).

The charge is complete when the animation stops. Only use Alcatel chargers.

2.2Power on your phone

Hold down the key until the telephone powers on, type in your PIN

code if necessary and then confirm with the key.The main screen is displayed.

If you do not know your PIN code or if you have forgotten it, contact your network operator. Do not leave your PIN code with your telephone. Store this information in a safe place when not in use.

If cell broadcast messages are displayed, use the key to browse through them or press the right softkey to return to the main screen.

While the phone is searching for a network, “Searching/Emergency” will be displayed.

In the power on screen, you also have access to the functions of “Radio”, “Camera”,“Music player”, etc. even if there is no SIM card inserted.

2.3Power off your phone

Hold down the key from the main screen.

20

IP2608_800A_UM_ENG_USA_01_10051019-20 19-20

2010-5-10 13:56:03