OPERATION
MAIN UNIT OPERATION
FAN Speed Indicator Lights
Power ON/OFF Button
•Used to start operation (short beep) and stop operation (long beep)
•Plasmacluster Indicator Light and Fan Speed Indicator Light turn on/off.
•Unless the power cord is unplugged, the op- eration will start in the previous mode.
•When stopping the operation in ION SHOW-
ER mode, the unit will return to the prior ION SHOWER mode.
FAN SPEED Button
Plasmacluster
ON/OFF Button
FAN SPEED Button
• The operation mode can be switched as below.
AUTO operation 
The fan speed is automatically switched (MEDIUM, LOW) depending on the amount of impurities in the air. The sen- sors detect the impurities for efficient air purification.
POLLEN mode operation 
The unit will operate at HIGH* fan speed for 10 minutes, then will alter- nate between MEDIUM and HIGH* for 20 minutes.
10 minutes: HIGH fan speed
20 minutes: MEDIUM fan speed
20 minutes: HIGH fan speed
SILENT operation 
The unit will operate quietly using minimal air intake.
MEDIUM operation 
The unit will operate at a fan speed of MEDIUM.
MAX operation 
The unit will operate at a fan speed of MAX.
*HIGH fan speed is an inter- mediate speed between ME-
DIUM and MAX.
*LOW fan speed is an interme- diate speed between SILENT and MEDIUM.
ION SHOWER Mode Button
When the ION SHOWER Mode button is pushed, the ION SHOWER operation will be activated. (Direct start is available even when the unit is not turned on.)
By continuously discharging a strong airflow for 15 minutes the unit effectively removes airborne dust, pollen, mould and allergens from the air as they are drawn through the filter system.
•When the operation finishes, the unit will return to the prior operation.