Sharp XG-MB55X, XR-20S, XR-10X, XR-10S, XR-20X Switching the Input Mode, Adjusting the Volume

Page 34

Image Projection (Continued)

Switching the Input Mode

Select the appropriate input mode for the connected equipment.

PressC INPUT 1, C INPUT 2, DINPUT 3 or EINPUT 4 on the remote control to select the input mode.

• When pressing INPUT (P/R) on the projector, input mode switches in the following order:

INPUT1INPUT2INPUT3INPUT4.

• When “Auto Search” is set to “On”, INPUT (P/ R) on the projector functions as the Auto Search buttons. (See page 43.)

Adjusting the Volume

Press K/L on the remote control or

–O/Q+ on the projector to adjust the vol- ume.

Note

On-screen Display

 

•Pressing K/–Owill lower the volume.

•Pressing L/Q+ will raise the volume.

•When the projector is connected to external equipment, the volume level of the external equip- ment changes in accordance with the volume level of the projector. Set the projector’s volume to the lowest level when turning the projector on/ off or changing the input signal.

•When you do not want to output the sound from the projector’s speaker while the projector is con- nected to external equipment, set “Speaker” in “PRJ-ADJ” menu to “Off”. (See page 43.)

Displaying the Black Screen and Turning off the Sound Temporarily

Press MAV MUTE on the remote con-

trol to temporarily display a black On-screen Display screen and turn off the sound.

Note

•Pressing MAV MUTE again will turn the projected image back on.

AV MUTE button

Volume buttons

INPUT buttons

30

Page 33 Page 35
Image 34
Page 33 Page 35
Contents XG-MB55X XR-20X/XR-20S XR-10X/XR-10S This Apparatus Must be Earthed If YOU have ANY DOUBT, Consult a Qualified ElectricianIii Page IntroductionENGLISH A. onlySharp PROJECTOR, Model XG-MB55X/XR-20X/XR-20S/XR-10X/XR-10S Sharp Electronics CorporationUsing the Menu Screen For Future ReferenceContents Reference Power Sources CleaningAccessories Power-Cord ProtectionSafety Check Damage Requiring ServiceReplacement Parts OverloadingAvoid locations with extremes of tem- perature Rest your eyes occasionallyDo not block the exhaust and intake vents Temperature monitor function Using the projector in other countriesOther connected equipment Accessories Optional accessoriesPart Names and Functions Height 29 AdjustProjector Audio Input 1 Rear ViewAudio Input Break Timer Picture ModeInserting the Batteries Attach the cover and slide it until it clicks into placeUsable Range Quick Start Setup and ProjectionHeight Upper side ProjectorStandard Setup Front Projection Setting up the ProjectorSetting up the Projector Ceiling-mount SetupProjection Projection PRJ ModeExample Normal Mode Picture Size DistanceStretch Mode Normal ModeScreen Size and Projection Distance Input Terminals and Connectable Main Equipment ConnectionsCOMPUTER-RGB/COMPONENT Samples of Cables for Connection To audio output terminal To RGB output terminal Connecting to a ComputerComputer To INPUT1 terminal To Audio Terminal Connecting to Video Equipment When using an S-video cable INPUT3Connecting to a Monitor with RGB Input Terminal When using a composite video cable INPUT4Connecting the Power Cord Controlling the Projector by a ComputerTurning the Projector On/Off Turning the Projector onAdjusting the Screen Size About the Setup GuideAdjusting the Projected Image Adjusting the Focus Image ProjectionAdjust lever Make small adjustments Adjusting the HeightUse the rear adjustment foot to make the projector level Rear adjustment footAdjusting the Volume Switching the Input ModeAV Mute button Volume buttons Input buttons Correcting Trapezoidal Distortion Press g Keystone to enter Keystone Correction modePress P/Q or O/R to adjust Keystone Correction Press g KeystoneResize Mode Press HresizeVideo Displaying and Setting the Break Timer Operating with the Remote ControlAuto Sync Auto Sync Adjustment Selecting the Picture ModeInput 1 Component/INPUT Menu ItemsInput 1 RGB/INPUT2 RGB Component/INPUT 3/INPUTItems you can set with Help menu Help menu nPress Q or O and select Picture to adjust Using the Menu ScreenMenu Selections Adjustments Press BmenuPress O or Q to adjust the item selected To adjust the projected image while watching itPress P or R and select Bright to adjust Press hENTERPicture Adjustment Picture menu Example Picture screen menu for Input 1 RGB mode2Adjusting the Image Menu operation nWhen using XG-MB55X or XR-20X Adjusting the Projected Image SCR ADJ menuSet Auto Keystone on the SCR ADJ menu to On Adjusting the Projected Image SCR ADJ menu Adjusting the Projector Function PRJ ADJ menu Adjusting the Projector Function PRJ ADJ menu This function changes the fan rotation speedLocking the Operation Buttons Enter the same keycode in Re- confirmATaking the Keylock off Troubleshooting with Help menu Utilizing Help menu functionsMaintenance Cleaning the projectorMaintenance Indicators Temperature warning indicator Lamp indicator Power indicatorPlease exercise care when Lamp Regarding the LampReplacing the Lamp Disconnect the power cord Removing and Installing the Lamp UnitRemove the lamp unit cover Resetting the Lamp Timer Connecting Pin Assignments GNDRS-232C Specifications and Command Settings Return code 0DHCommands Control Contents Input 4 CLR Temp *2 OK or ERR Pixel Clock 12-108 MHz Computer Compatibility ChartXR-20S/XR-10S XGA, SXGA, SXGA+ Troubleshooting 23-26Input 1 Component For Sharp Assistance Specifications Audio OutputDimensions Index

XG-MB55X, XR-20X, XR-10S, XR-10X, XR-20S specifications

The Sharp XR-10X, XR-20S, XR-10S, XR-20X, and XG-MB55X are a series of advanced projectors that have garnered attention for their impressive features and technologies. These projectors cater to various needs, from educational settings to corporate environments and even home theaters.

The Sharp XR-10X and XR-10S are part of the compact and lightweight range, ideal for portability. With their impressive brightness levels reaching up to 2200 lumens, they offer clear and vibrant images even in well-lit rooms. Both models utilize DLP technology, which results in high contrast ratios and rich color reproduction. The XR-10S includes enhanced connectivity options, featuring multiple inputs such as HDMI, VGA, and composite, making it adaptable to various devices.

The XR-20S and XR-20X take performance up a notch, boasting a higher brightness of up to 3000 lumens. This makes them suitable for larger rooms and professional presentations. Their additional features include built-in speakers, enabling users to deliver audio without needing external equipment. The XR-20X also comes equipped with advanced image processing technologies, ensuring sharper and clearer visuals, along with an expanded color gamut.

The XG-MB55X stands out as a higher-end model, designed for more sophisticated environments. It offers exceptional resolution and advanced imaging technologies such as 3D compatibility, making it perfect for immersive presentations and cinematic experiences. Its high brightness capability, along with a robust lamp life, ensures reliability and reduced maintenance costs.

One of the key characteristics shared across these models is their user-friendly interface and intuitive controls, allowing for quick setup and adjustment. Each projector features keystone correction and zoom capabilities, which facilitate flexible placement and enhance installation ease.

In addition, the projectors are designed with energy efficiency in mind, promoting lower power consumption without sacrificing performance. Their lightweight design also ensures mobility, making them ideal for users who frequently move between locations.

Overall, the Sharp XR-10X, XR-20S, XR-10S, XR-20X, and XG-MB55X projectors provide excellent image quality, versatile connectivity, and user-friendly features, making them suitable for a wide range of applications. Whether for educational purposes, business presentations, or home entertainment, these projectors deliver outstanding performance and reliability.
Top Page Image Contents