Sharp XR-10S, XR-20S Connecting to a Computer, To audio output terminal To RGB output terminal

Page 27

Connecting to a Computer

Before connecting, ensure that the power cord of the projector is unplugged from the AC outlet and turn off the devices to be connected. After making all connections, turn on the projector and then the other devices. When connecting a computer, ensure that it is the last device to be turned on after all the connections are made.

Ensure that you have read the operation manuals of the devices to be connected before making connections.

To audio output terminal

To RGB output terminal

Supplied

RGB Cable

accessory

 

 

Computer

 

 

 

To INPUT1 terminal

To AUDIO

 

 

(INPUT1, 2)

 

 

terminal

*ø3.5 mm stereo or mono audio cable (commercially available or available as Sharp service part QCNWGA038WJPZ)

RGB Cable

*When using the ø3.5 mm mono audio cable, the volume level will be half of when using the ø3.5 mm stereo audio cable.

Connections

Note

See page 58 “Computer Compatibility Chart” for a list of computer signals compatible with the projec- tor. Use with computer signals other than those listed may cause some of the functions to not work.

A Macintosh adaptor may be required for use with some Macintosh computers. Contact your near- est Macintosh Dealer.

Depending on the computer you are using, an image may not be projected unless the computer’s external output port is switched on. (e.g. Press “Fn” and “F5” keys simultaneously when using a SHARP notebook computer). Refer to the specific instructions in your computer's operation manual to enable your computer’s external output port.

23

Image 27
Contents XG-MB55X XR-20X/XR-20S XR-10X/XR-10S If YOU have ANY DOUBT, Consult a Qualified Electrician This Apparatus Must be EarthedIii Page A. only IntroductionENGLISHSharp Electronics Corporation Sharp PROJECTOR, Model XG-MB55X/XR-20X/XR-20S/XR-10X/XR-10SFor Future Reference Using the Menu ScreenContents Reference Power-Cord Protection CleaningAccessories Power SourcesOverloading Damage Requiring ServiceReplacement Parts Safety CheckRest your eyes occasionally Avoid locations with extremes of tem- peratureDo not block the exhaust and intake vents Using the projector in other countries Temperature monitor functionOther connected equipment Optional accessories AccessoriesHeight 29 Adjust Part Names and FunctionsProjector Rear View Audio Input 1Audio Input Picture Mode Break TimerAttach the cover and slide it until it clicks into place Inserting the BatteriesUsable Range Setup and Projection Quick StartHeight Projector Upper sideCeiling-mount Setup Setting up the ProjectorSetting up the Projector Standard Setup Front ProjectionDistance Projection PRJ ModeExample Normal Mode Picture Size ProjectionNormal Mode Stretch ModeScreen Size and Projection Distance Connections Input Terminals and Connectable Main EquipmentCOMPUTER-RGB/COMPONENT Samples of Cables for Connection Connecting to a Computer To audio output terminal To RGB output terminalComputer To INPUT1 terminal To Audio Terminal When using an S-video cable INPUT3 Connecting to Video EquipmentWhen using a composite video cable INPUT4 Connecting to a Monitor with RGB Input TerminalControlling the Projector by a Computer Connecting the Power CordTurning the Projector on Turning the Projector On/OffImage Projection About the Setup GuideAdjusting the Projected Image Adjusting the Focus Adjusting the Screen SizeRear adjustment foot Adjusting the HeightUse the rear adjustment foot to make the projector level Adjust lever Make small adjustmentsSwitching the Input Mode Adjusting the VolumeAV Mute button Volume buttons Input buttons Press g Keystone Press g Keystone to enter Keystone Correction modePress P/Q or O/R to adjust Keystone Correction Correcting Trapezoidal DistortionPress Hresize Resize ModeVideo Selecting the Picture Mode Operating with the Remote ControlAuto Sync Auto Sync Adjustment Displaying and Setting the Break TimerComponent/INPUT 3/INPUT Menu ItemsInput 1 RGB/INPUT2 RGB Input 1 Component/INPUTHelp menu n Items you can set with Help menuPress Bmenu Using the Menu ScreenMenu Selections Adjustments Press Q or O and select Picture to adjustPress hENTER To adjust the projected image while watching itPress P or R and select Bright to adjust Press O or Q to adjust the item selectedExample Picture screen menu for Input 1 RGB mode Picture Adjustment Picture menuMenu operation n 2Adjusting the ImageAdjusting the Projected Image SCR ADJ menu When using XG-MB55X or XR-20XSet Auto Keystone on the SCR ADJ menu to On Adjusting the Projected Image SCR ADJ menu Adjusting the Projector Function PRJ ADJ menu This function changes the fan rotation speed Adjusting the Projector Function PRJ ADJ menuEnter the same keycode in Re- confirm Locking the Operation ButtonsATaking the Keylock off Utilizing Help menu functions Troubleshooting with Help menuCleaning the projector MaintenanceTemperature warning indicator Lamp indicator Power indicator Maintenance IndicatorsPlease exercise care when Regarding the Lamp LampReplacing the Lamp Removing and Installing the Lamp Unit Disconnect the power cordRemove the lamp unit cover Resetting the Lamp Timer GND Connecting Pin AssignmentsReturn code 0DH RS-232C Specifications and Command SettingsCommands Control Contents Input 4 CLR Temp *2 OK or ERR Computer Compatibility Chart Pixel Clock 12-108 MHzXR-20S/XR-10S XGA, SXGA, SXGA+ 23-26 TroubleshootingInput 1 Component For Sharp Assistance Audio Output SpecificationsDimensions Index

XG-MB55X, XR-20X, XR-10S, XR-10X, XR-20S specifications

The Sharp XR-10X, XR-20S, XR-10S, XR-20X, and XG-MB55X are a series of advanced projectors that have garnered attention for their impressive features and technologies. These projectors cater to various needs, from educational settings to corporate environments and even home theaters.

The Sharp XR-10X and XR-10S are part of the compact and lightweight range, ideal for portability. With their impressive brightness levels reaching up to 2200 lumens, they offer clear and vibrant images even in well-lit rooms. Both models utilize DLP technology, which results in high contrast ratios and rich color reproduction. The XR-10S includes enhanced connectivity options, featuring multiple inputs such as HDMI, VGA, and composite, making it adaptable to various devices.

The XR-20S and XR-20X take performance up a notch, boasting a higher brightness of up to 3000 lumens. This makes them suitable for larger rooms and professional presentations. Their additional features include built-in speakers, enabling users to deliver audio without needing external equipment. The XR-20X also comes equipped with advanced image processing technologies, ensuring sharper and clearer visuals, along with an expanded color gamut.

The XG-MB55X stands out as a higher-end model, designed for more sophisticated environments. It offers exceptional resolution and advanced imaging technologies such as 3D compatibility, making it perfect for immersive presentations and cinematic experiences. Its high brightness capability, along with a robust lamp life, ensures reliability and reduced maintenance costs.

One of the key characteristics shared across these models is their user-friendly interface and intuitive controls, allowing for quick setup and adjustment. Each projector features keystone correction and zoom capabilities, which facilitate flexible placement and enhance installation ease.

In addition, the projectors are designed with energy efficiency in mind, promoting lower power consumption without sacrificing performance. Their lightweight design also ensures mobility, making them ideal for users who frequently move between locations.

Overall, the Sharp XR-10X, XR-20S, XR-10S, XR-20X, and XG-MB55X projectors provide excellent image quality, versatile connectivity, and user-friendly features, making them suitable for a wide range of applications. Whether for educational purposes, business presentations, or home entertainment, these projectors deliver outstanding performance and reliability.