Sharp XR-10X, XR-20S, XR-10S, XR-20X, XG-MB55X operation manual Specifications, Audio Output

Page 66

Specifications

Product type

Projector

 

Model

XG-MB55X/XR-20X/XR-20S/XR-10X/XR-10S

Video system

NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL-60/SECAM/DTV480I/DTV480P/

 

DTV540P/DTV576I/DTV576P/DTV720P/DTV1035I/DTV1080I/DTV1080I-50

Display method

Single Chip Digital Micromirror DeviceTM (DMDTM) by Texas Instruments

DMD panel

Panel size: [XG-MB55X/XR-20X/XR-10X] 0.55" (14 mm), 1chip XGA DMD

 

[XR-20S/XR-10S] 0.55" (14 mm), 1chip SVGA DMD

 

No. of dots: [XG-MB55X/XR-20X/XR-10X] 786,432 dots (1,024 [H] ⋅ 768 [V])

 

[XR-20S/XR-10S] 480,000 dots (800 [H] ⋅ 600 [V])

Lens

1–1.15 ⋅ zoom lens, F2.4–2.6, f = 19.0–21.9 mm

Projection lamp

275 W DC lamp

 

 

(AN-XR20LP (for XG-MB55X/XR-20X/XR-20S)/AN-XR10LP (for XR-10X/XR-10S))

Component input signal

15-pin mini D-sub connector

(INPUT1/2)

Y: 1.0 Vp-p, sync negative, 75 Ω terminated

 

PB: 0.7 Vp-p, 75 Ω terminated

 

PR: 0.7 Vp-p, 75 Ω terminated

Horizontal resolution

[XG-MB55X/XR-20X/XR-10X] 600 TV lines (DTV720P)

 

[XR-20S/XR-10S] 520 TV lines (DTV720P)

Computer RGB input

15-pin mini D-sub connector

(INPUT 1/2)/output

RGB separate/sync on green type analog input: 0–0.7 Vp-p, positive, 75 Ω terminated

(OUTPUT) signal

HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)

 

VERTICAL SYNC. SIGNAL: Same as above

S-video input signal

4-pin mini DIN connector

(INPUT 3)

Y (luminance signal): 1.0 Vp-p, sync negative, 75 Ω terminated

 

C (chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated

Video input signal

RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75 Ω

(INPUT 4)

terminated

 

Vertical frequency

45–85 Hz

 

Horizontal frequency

15–70 kHz

 

Pixel clock

12–108 MHz

 

RS-232C terminal

9-pin mini DIN connector

Audio input signal

ø3.5 mm minijack or RCA terminal: 0.5 Vrms, more than 22 kΩ (stereo)

Audio output signal

ø3.5 mm minijack: 0.5 Vrms, less than 2.2 kΩ

(AUDIO OUTPUT 1-4)

4 cm ⋅ 2.85 cm oval ⋅ 1

Speaker system

Rated voltage

AC 100–240 V

 

Input current

3.6 A

 

Rated frequency

50/60 Hz

 

Power consumption

350 W (Lamp Setting

“Bright”)/

 

305 W (Lamp Setting

“Eco + Quiet”) with AC 100 V

 

330 W (Lamp Setting

“Bright”)/

 

285 W (Lamp Setting

“Eco + Quiet”) with AC 240 V

Power consumption (standby) 4 W (AC 100 V) – 5 W (AC 240 V)

Heat dissipation

1,315 BTU/hour (Lamp Setting “Bright”)/

 

1,145 BTU/hour (Lamp Setting “Eco + Quiet”) with AC 100 V

 

1,240 BTU/hour (Lamp Setting “Bright”)/

 

1,070 BTU/hour (Lamp Setting “Eco + Quiet”) with AC 240 V

Operating temperature

41°F to 95°F (+5°C to +35°C)

Storage temperature

–4°F to 140°F (–20°C to +60°C)

Cabinet

Plastic

 

I/R carrier frequency

38 kHz

 

Dimensions (approx.)

12 13/32" ⋅ 4 19/64" ⋅ 11 1/32" (315 (W) ⋅ 109 (H) ⋅ 280 (D) mm) (main body only)

 

12 13/32" ⋅ 4 47/64" ⋅ 11 37/64" (315 (W) ⋅ 120 (H) ⋅ 294 (D) mm) (including adjust-

 

ment foot and projecting parts)

Weight (approx.)

8.6 lbs. (3.9 kg)

 

Replacement parts

Remote control, Power cord for U.S. and Canada, etc., Power cord for Europe,

 

except U.K., Power cord for U.K. and Singapore, Power cord for Australia, New

 

Zealand and Oceania, RGB cable, DIN-D-sub RS-232C adaptor, Operation

 

manual (Printed and CD-ROM)

As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specifica- tion figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

62

Page 65 Page 67
Image 66
Page 65 Page 67
Contents XG-MB55X XR-20X/XR-20S XR-10X/XR-10S This Apparatus Must be Earthed If YOU have ANY DOUBT, Consult a Qualified ElectricianIii Page IntroductionENGLISH A. onlySharp PROJECTOR, Model XG-MB55X/XR-20X/XR-20S/XR-10X/XR-10S Sharp Electronics CorporationUsing the Menu Screen For Future ReferenceContents Reference Power Sources CleaningAccessories Power-Cord ProtectionSafety Check Damage Requiring ServiceReplacement Parts OverloadingRest your eyes occasionally Avoid locations with extremes of tem- peratureDo not block the exhaust and intake vents Using the projector in other countries Temperature monitor functionOther connected equipment Accessories Optional accessoriesHeight 29 Adjust Part Names and FunctionsProjector Rear View Audio Input 1Audio Input Break Timer Picture ModeInserting the Batteries Attach the cover and slide it until it clicks into placeUsable Range Setup and Projection Quick StartHeight Upper side ProjectorStandard Setup Front Projection Setting up the ProjectorSetting up the Projector Ceiling-mount SetupProjection Projection PRJ ModeExample Normal Mode Picture Size DistanceNormal Mode Stretch ModeScreen Size and Projection Distance Connections Input Terminals and Connectable Main EquipmentCOMPUTER-RGB/COMPONENT Samples of Cables for Connection Connecting to a Computer To audio output terminal To RGB output terminalComputer To INPUT1 terminal To Audio Terminal Connecting to Video Equipment When using an S-video cable INPUT3Connecting to a Monitor with RGB Input Terminal When using a composite video cable INPUT4Connecting the Power Cord Controlling the Projector by a ComputerTurning the Projector On/Off Turning the Projector onAdjusting the Screen Size About the Setup GuideAdjusting the Projected Image Adjusting the Focus Image ProjectionAdjust lever Make small adjustments Adjusting the HeightUse the rear adjustment foot to make the projector level Rear adjustment footSwitching the Input Mode Adjusting the VolumeAV Mute button Volume buttons Input buttons Correcting Trapezoidal Distortion Press g Keystone to enter Keystone Correction modePress P/Q or O/R to adjust Keystone Correction Press g KeystoneResize Mode Press HresizeVideo Displaying and Setting the Break Timer Operating with the Remote ControlAuto Sync Auto Sync Adjustment Selecting the Picture ModeInput 1 Component/INPUT Menu ItemsInput 1 RGB/INPUT2 RGB Component/INPUT 3/INPUTItems you can set with Help menu Help menu nPress Q or O and select Picture to adjust Using the Menu ScreenMenu Selections Adjustments Press BmenuPress O or Q to adjust the item selected To adjust the projected image while watching itPress P or R and select Bright to adjust Press hENTERPicture Adjustment Picture menu Example Picture screen menu for Input 1 RGB mode2Adjusting the Image Menu operation nAdjusting the Projected Image SCR ADJ menu When using XG-MB55X or XR-20XSet Auto Keystone on the SCR ADJ menu to On Adjusting the Projected Image SCR ADJ menu Adjusting the Projector Function PRJ ADJ menu Adjusting the Projector Function PRJ ADJ menu This function changes the fan rotation speedEnter the same keycode in Re- confirm Locking the Operation ButtonsATaking the Keylock off Troubleshooting with Help menu Utilizing Help menu functionsMaintenance Cleaning the projectorMaintenance Indicators Temperature warning indicator Lamp indicator Power indicatorPlease exercise care when Regarding the Lamp LampReplacing the Lamp Removing and Installing the Lamp Unit Disconnect the power cordRemove the lamp unit cover Resetting the Lamp Timer Connecting Pin Assignments GNDRS-232C Specifications and Command Settings Return code 0DHCommands Control Contents Input 4 CLR Temp *2 OK or ERR Computer Compatibility Chart Pixel Clock 12-108 MHzXR-20S/XR-10S XGA, SXGA, SXGA+ Troubleshooting 23-26Input 1 Component For Sharp Assistance Specifications Audio OutputDimensions Index

XG-MB55X, XR-20X, XR-10S, XR-10X, XR-20S specifications

The Sharp XR-10X, XR-20S, XR-10S, XR-20X, and XG-MB55X are a series of advanced projectors that have garnered attention for their impressive features and technologies. These projectors cater to various needs, from educational settings to corporate environments and even home theaters.

The Sharp XR-10X and XR-10S are part of the compact and lightweight range, ideal for portability. With their impressive brightness levels reaching up to 2200 lumens, they offer clear and vibrant images even in well-lit rooms. Both models utilize DLP technology, which results in high contrast ratios and rich color reproduction. The XR-10S includes enhanced connectivity options, featuring multiple inputs such as HDMI, VGA, and composite, making it adaptable to various devices.

The XR-20S and XR-20X take performance up a notch, boasting a higher brightness of up to 3000 lumens. This makes them suitable for larger rooms and professional presentations. Their additional features include built-in speakers, enabling users to deliver audio without needing external equipment. The XR-20X also comes equipped with advanced image processing technologies, ensuring sharper and clearer visuals, along with an expanded color gamut.

The XG-MB55X stands out as a higher-end model, designed for more sophisticated environments. It offers exceptional resolution and advanced imaging technologies such as 3D compatibility, making it perfect for immersive presentations and cinematic experiences. Its high brightness capability, along with a robust lamp life, ensures reliability and reduced maintenance costs.

One of the key characteristics shared across these models is their user-friendly interface and intuitive controls, allowing for quick setup and adjustment. Each projector features keystone correction and zoom capabilities, which facilitate flexible placement and enhance installation ease.

In addition, the projectors are designed with energy efficiency in mind, promoting lower power consumption without sacrificing performance. Their lightweight design also ensures mobility, making them ideal for users who frequently move between locations.

Overall, the Sharp XR-10X, XR-20S, XR-10S, XR-20X, and XG-MB55X projectors provide excellent image quality, versatile connectivity, and user-friendly features, making them suitable for a wide range of applications. Whether for educational purposes, business presentations, or home entertainment, these projectors deliver outstanding performance and reliability.
Top Page Image Contents