3.Remove the battery (3).
Reverse this procedure to install the battery.
Speakers
Description | Spare part number |
|
|
Speaker Kit (includes left and right speakers and cables) | |
|
|
Before removing the speakers, follow these steps:
1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.Disconnect all external devices from the tablet.
4.Remove the back cover (see Back cover on page 13).
5.Remove the battery (see Battery on page 15).
Remove the speakers:
1.Remove the shield tape (1) that covers the speaker cables.
NOTE: The shield tape is included in the I/O Hardware Kit, spare part number
2.Unsolder the red (2) and black speaker cables (3) from the system board speaker connectors.
NOTE: When installing the left speaker, the red speaker cable should be soldered to the system board speaker “positive” terminal. The black speaker cable should be soldered to the system board speaker “negative” terminal.
3.Remove the Phillips PM1.25×4.0 screw (4) that secures the left speaker to the display panel assembly.
16 | Chapter 5 Removal and replacement procedures |