HP 7 Extreme manual

Page 28

Remove the front-facing webcamera:

1.Remove the shield tape (1) that secures the front-facing webcamera cable to the display panel assembly.

NOTE: The shield tape is included in the I/O Hardware Kit, spare part number 745164-001.

2.Disconnect the front-facing webcamera cable (2) from the system board.

3.Detach the front-facing webcamera (3) from the display panel assembly. (The front-facing webcamera is attached to the display panel assembly with double-sided adhesive.)

4.Remove the front-facing webcamera and cable. Reverse this procedure to install the front-facing webcamera.

22	Chapter 5 Removal and replacement procedures

Image 28

Contents HP Slate⁷ Extreme Tablet Product notice Safety warning notice Iv Safety warning notice Table of contents Page Product description PanelProduct description External component identification External component identification Illustrated parts catalog Locating the serial number, product number, and model numberTablet major components Component Spare part numberMiscellaneous parts Sequential part number listing743207-001 Service considerations Removal and replacement preliminary requirementsTools required Grounding guidelines Electrostatic discharge damagePackaging and transporting guidelines Equipment guidelines Tablet component replacement procedures Removal and replacement proceduresBack cover Page Battery Speakers Page Rear-facing webcamera Page Board Front-facing webcamera Page Antenna board System board Page Page Page Specifications Back up and reset Backing up and recovering your dataUpdating apps, widgets, and the operating system Factory data reset Requirements for all countries Power cord set requirementsRequirements for specific countries and regions Power cord set requirements Recycling Index Jacks