HP 12 Pro manual Antenna board, Description Spare part number

Antenna board

Description	Spare part number
Antenna (includes antenna cable and transceiver)	808086-001
For models with WWAN capability	795923-001
For models without WWAN capability	808434-001

Before removing the antenna board, follow these steps:

1.Turn off the tablet. If you are unsure whether the tablet is off, turn the tablet on, and then shut it down through the operating system.

2.Disconnect the power from the tablet by unplugging the power adapter cord from the tablet.

3.Disconnect all external devices from the tablet.

4.Remove the back cover (see Back cover on page 14).

5.Remove the battery (see Battery on page 15).

6.Remove the rear-facing webcamera (see Rear-facing webcamera on page 16).

7.Remove the front-facing webcamera (see Front-facing webcamera on page 17).

8.Remove the volume and power button board (see Volume and power button board on page 19).

9.Remove the top and bottom speakers (see Speakers on page 19).

Remove the antenna board:

1.Disconnect the antenna board cable (1) from the system board, and then remove it (2).

22 Chapter 6 Removal and replacement procedures