HP 12 Pro manual Outer ring

▲Release the docking charger (1) from the metal frame, and then remove it (2).

Reverse this procedure to install the docking charger.

Outer ring

Description	Spare part number
Outer ring for models with WWAN capability	807960-001
Outer ring for models without WWAN capability	807960-001

1.Turn off the tablet. If you are unsure whether the tablet is off, turn the tablet on, and then shut it down through the operating system.

2.Disconnect the power from the tablet by unplugging the power adapter cord from the tablet.

3.Disconnect all external devices from the tablet.

4.Remove the back cover (see Back cover on page 14).

5.Remove the battery (see Battery on page 15).

6.Remove the rear-facing webcamera (see Rear-facing webcamera on page 16).

7.Remove the front-facing webcamera (see Front-facing webcamera on page 17).

8.Remove the volume and power button board (see Volume and power button board on page 19).

9.Remove the top and bottom speakers (see Speakers on page 19).

10.Remove the antenna board (see Antenna board on page 22).

11.Remove the connector board (see Connector board on page 24).

12.Remove the system board (see System board on page 25).

13.Remove the docking charger (see Docking charger on page 26).

Outer ring 27