CAUTION: Before positioning the tablet with the display panel facing down, make sure the work surface is clear of tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to the display panel assembly.
1.Place the display panel assembly on a flat surface, display panel side down, with the power button and volume buttons toward you.
2.Unsolder the battery cables from the terminals (1) on the system board.
NOTE: When installing the battery, the battery red/yellow cable should be soldered to the system board “+” terminal, and the battery black cable should be soldered to the system board
3.Remove the battery (2).
Reverse this procedure to install the battery.
Antenna board
Description | Spare part number |
|
|
Antenna Kit (includes wireless antenna transceiver and cable) | |
|
|
Before removing the antenna board, follow these steps:
1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.Disconnect all external devices from the tablet.
4.Remove the back cover (see Back cover on page 13).
5.Disconnect the battery cables from the system board (see Battery on page 15).
16 | Chapter 5 Removal and replacement procedures |