HP 7+ 1300, 7 1200 Removal and replacement procedures, Tablet component replacement procedures

5Removal and replacement procedures

Tablet component replacement procedures

CAUTION: Tablet components described in this chapter should only be accessed by an authorized service provider. Accessing these parts can damage the tablet and void the warranty.

This chapter provides removal and replacement procedures for authorized service provider only parts.

There are as many as 6 screws that must be removed, replaced, and/or loosened when servicing the tablet. Make special note of each screw size and location during removal and replacement.

Back cover

Description	Spare part number
For use only on Compaq 7+ 1300 Tablet models	756827-001
For use only on Compaq 7 1200 Tablet models	754935-001
7-in., LCD, TouchScreen IPS display panel assembly for use only on Compaq 7+ 1300	755969-001
Tablet models (includes display panel cable and TouchScreen cable)
7-in., LCD, TouchScreen TN display panel assembly for use only on Compaq 7 1200	754940-001
Tablet models (includes display panel cable and TouchScreen cable)

Before disassembling the tablet, follow these steps:

1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.

2.Disconnect the power from the tablet by unplugging the power cord from the tablet.

3.Disconnect all external devices from the tablet.

Remove the back cover:

Tablet component replacement procedures 13