HP 7+ 1300, 7 1200 manual Speaker

Page 23

Remove the antenna board:

1.Unsolder the antenna cable from the system board wireless terminal (1).

2.Release the antenna cable from the routing channel (2) between the battery and the system board.

3.Detach the antenna transceiver (3) from the display panel assembly. (The antenna transceiver is attached to the display panel assembly with double-sided adhesive.)

4.Remove the antenna transceiver and cable. Reverse this procedure to install the antenna.

Speaker

Description

Spare part number

 

 

Speaker Kit (includes speaker and cables)

755197-001

 

 

Before removing the bottom speaker/vibrator module assembly, follow these steps:

1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.

2.Disconnect the power from the tablet by unplugging the power cord from the tablet.

3.Disconnect all external devices from the tablet.

4.Remove the back cover (see Back cover on page 13).

5.Disconnect the battery cables from the system board (see Battery on page 15).

Speaker 17

Image 23
Contents Compaq 7+ 1300 Tablet and Compaq 7 1200 Tablet Software terms Product noticeSafety warning notice Iv Safety warning notice Table of contents Page Product description Operating system Category Description Compaq 7+ Tablet Power requirementsServiceability End user replaceable part External component identification External component identification Locating the serial number, product number, and model number Illustrated parts catalogMP rear-facing webcamera includes cable Power/volume button board includes cableTablet major components Component Spare part number Back coverSequential part number listing Miscellaneous partsSystem memory, and an 8.0-GB Nand flash drive Tools required Removal and replacement preliminary requirementsService considerations Electrostatic discharge damage Grounding guidelinesPackaging and transporting guidelines Material Use Voltage protection level Equipment guidelinesDescription Spare part number Removal and replacement proceduresTablet component replacement procedures Back coverPage Battery Antenna board Speaker Rear-facing webcamera Microphone Front-facing webcamera Power/volume button board System board Page Page Specifications Statement of Volatility Select the File menu, then Save Changes and Exit Cmos Non-volatile memory usageNon-volatile memory usage Statement of Volatility Questions and answers Country/region Accredited agency Applicable note number Power cord set requirementsRequirements for all countries Requirements for specific countries and regionsRequirements for specific countries and regions Recycling Jacks IndexTablet
Related manuals
Manual 17 pages 16.65 Kb