Setting Up the Tablet PC
Turning On the Tablet PC
To turn on the tablet PC, slide and release the power switch 1. When the tablet PC is on:
■The power/standby light 2 turns on.
■You are prompted to begin software setup. If the tablet PC does not turn on, see Chapter 3.
Turning on the tablet PC
Continuing the Setup
After you have turned on the tablet PC, follow the instructions under “Setting Up the Pen” and “Setting Up the Software” earlier in this chapter.
Compaq recommends that you set up the Tablet PC pen before setting up software so you can use the pen during software setup.
Getting Started |