HP SAN manual Security Config dialog, Archiving a security configuration to a file

Page 29

Security Config dialog

Use the Security Config dialog, shown in Figure 9, to save the active security configuration on the switch to non-volatile or to temporary memory, and to require the domain ID of a switch be validated before attaching to the fabric.

Figure 9 Security Config dialog

To configure switch security from the faceplate display:

1.Select Security > Edit Security Config to open the Security Config dialog.

2.Select the Auto Save option to enable (default) or disable Auto Save mode.

If enabled, the security configuration is saved to non-volatile memory on the switch. If disabled, the security file is saved only to temporary memory. The Auto Save feature is used when Fabric Binding is enabled. When Auto Save is disabled, any updates from remote switches will not be saved locally. If the local switch is reset, it may isolate.

3.Select the Fabric Binding Enabled option to require the expected domain ID of a switch to be verified before being allowed to attach to the fabric.

NOTE: The fabric binding feature must be enabled on all switches in the fabric. When enabling this feature, it is best to set the switch state to offline, enable the fabric binding feature on all switches, and then set the switch state to online.

4.Click OK to save the settings and close the Security Config dialog.

Archiving a security configuration to a file

To archive (save) a security configuration to a file from the faceplate display:

1.Click Security on the tool bar, or select Security > Edit Security to open the Edit Security dialog.

2.Make desired changes to the security settings using the security dialogs.

3.Select File > Save As.

4.Enter a name and location for the security file (.xml extension) in the Save dialog.

5.Click Save to save the security file.

Activating a security set

Only one security set can be active at one time. To activate a security set from the faceplate display:

1.Select Security > Activate Security Set to open the Activate Security Set dialog.

2.Select a security set from the drop-down list.

3.Click Activate to activate the security set.

Page 28 Page 30
Image 29
Page 28 Page 30
Contents McDATA 4Gb SAN Switch Page Contents Managing switches Glossary Index Managing portsTables Related documentation Intended audiencePrerequisites Jdom license Document conventions and symbolsHP-authorized reseller HP technical supportHelpful web sites Using McDATA Web Server/Element Manager Starting McDATA Web Server Workstation requirementsExiting McDATA Web Server or Element Manager Starting Element Manager in HafmSetting preferences Viewing software version and copyright information Using online helpEnabling call home Enabling e-mail supportMcDATA Web Server interface User interfaceMenu bar Shortcut keys Popup menusGraphic window McDATA Web Server Fabric treeSelecting ports Selecting switchesData windows and tabs Securing a fabric Security consistency checklistUser account security Remote authenticationConnection security Device security Edit Security dialog Create Security Group dialog Create Security Set dialog Create Security Group Member dialog McDATA 4Gb SAN Switch for HP p-Class BladeSystem user guide Viewing properties of a security set, group, or member Editing the security configuration on a switchActivating a security set Security Config dialogArchiving a security configuration to a file Rediscovering a fabric Fabric servicesEvents browser Displaying the event browserSorting the event browser Saving the event browser to a file Filtering the event browserDevices data window Working with device information and nicknamesManaging device port nicknames Displaying detailed device informationEditing a nickname Creating a nicknameDeleting a nickname Exporting nicknames to a fileZones Zoning a fabricZoning concepts Zoning database Zone setsZoning limits and properties Editing the zoning database Managing the zoning databaseMcDATA 4Gb SAN Switch for HP p-Class BladeSystem user guide Restoring the zoning database from a file Configuring the zoning databaseSaving the zoning database to a file Removing all zoning definitions Restoring the default zoning databaseManaging the active zone set Active zone set data window Displaying the configured and active zone setsActivating and deactivating a zone set Creating a zone setRemoving a zone from a zone set Removing a zone setCreating a zone in a zone set Managing zonesRemoving a zone member Adding zone membersRenaming a zone or a zone set Zone merge failure Zone merge failure recoveryMerging fabrics and zoning Managing user accounts Managing switchesCreating user accounts User Account Administration dialog Add Account tabRemoving a user account User Account Administration Dialog Remove Account tabUser Account Administration dialog Change Password tab Changing a user account passwordModifying a user account User Account Administration dialog Modify Account tabConfiguring Radius servers Adding a Radius server Removing a Radius server Editing Radius server information Modifying Radius server authentication order Device and Host Bus Adapter information Displaying switch informationSwitch event log Switch data window Switch status and operational informationMcDATA 4Gb SAN Switch for HP p-Class BladeSystem user guide With a switch Ratov Port status and operational information McDATA Web Server Configured Zonesets data windowPort performance statistics Configuring port threshold alarms Setting the date/time and enabling NTP client Paging a switchResetting a switch Switch properties Configuring a switchDomain ID and domain ID lock Syslog Symbolic nameIn-band management Switch administrative statesBroadcast support Fabric Device Management Interface Advanced switch propertiesInterop mode System servicesTimeout values Page Network properties Snmp properties Snmp trap configuration Snmp configurationSwitch binding Archiving a switchRestoring a switch Restoring the factory default configuration Downloading a support file Installing Product Feature Enablement keys Installing firmware Hardware status LEDs Displaying hardware statusPort information data window Managing portsPersistent and will be lost on a switch reset VIEnable and LCFEnable features based on Port statistics data window LIP ALPD,ALPS Alps Port symbolic name Viewing and configuring portsPort states Port types Device scan Port speedsPort transceiver media status Port binding Resetting a portTesting ports Page Glossary FRU SFP 100 Index 102 System Fault LED 84 system services 104
Top Page Image Contents