HP AARTDZHTE/958000284008 manual Hafm and ﬁrmware compatibility

Page 10

HAFM and ﬁrmware compatibility

Table 2 lists the minimum version of HAFM that can run with the various versions of ﬁrmware for the directors and edge switches.

Table 2 HAFM and ﬁrmware compatibility

Firmware version	HAFM version (minimum)

01.01.02	04.00.01 (HP EFCM)

01.02.02-06	04.01.02-14 (SDCM)

01.03.00-35	04.02.00-40 (HP EFCM)

01.04.00-01	04.02.00-40 (SDCM)

02.00.00-33	06.00.00-45 (HP EFCM)

02.00.02-01	06.00.02-06

04.01.02-04	06.03.01-05

05.02.00-13	07.01.00-09 (Notebook Server)

05.02.00-13	07.02.00-09 (HAFM Appliance)

05.05.00-12	None (Edge Switch 2/12)

06.01.00-18	07.01.00-09 (Notebook Server)

06.01.00-18	07.02.00-09 (HAFM Appliance)

06.01.00-18	08.02.00 recommended (HAFM Appliance)

06.02.00-22	07.01.00-09 (Notebook Server)

06.02.00-22	07.02.00-09 (HAFM Appliance)

06.02.00-22	08.02.00 recommended (HAFM Appliance)

07.00.00-84	07.01.00-09 (Notebook Server)

07.00.00-84	07.02.00-09 (HAFM Appliance)

07.00.00-84	08.06.00 recommended (HAFM Appliance)

07.01.02–4	07.01.00-09 (Notebook Server)

07.01.02–4	07.02.00-09 (HAFM Appliance)

07.01.02–4	08.06.00 recommended (HAFM Appliance)

8

Image 10

Contents HP StorageWorks Edge Switch release notes Edge Switch release notes Intended audience Release notes informationFirmware version Other edge switch documentation CD-ROM directory structure Supported conﬁgurations Important information Cable requirementsMinor Code Enhancements and Fixes in fw Occasional Ethernet hang issue is resolved Features not supported in this releaseDocumentation released with ﬁrmware 07.00.00 and Hafm HP and McDATA terminology Hafm and ﬁrmware compatibility Hafm and ﬁrmware compatibilityPrerequisites for installing and using ﬁrmware Upgrading from an earlier version of ﬁrmwareUpgrading ﬁrmware on an edge switch from 04.xx.xx to Considerations for downgrading the version of ﬁrmwareEdge Switch release notes Hafm upgrade required for ﬁrmware version Zone FlexPar feature Standard features Enhanced SANtegrity Security SuiteAdvanced Fabric Diagnostics ISL fencingOsms change Default zone is disabled by defaultSome IP addresses must be avoided Zoning change Rscn control Hard zoningSnmp changes Using the same ﬁrmware Zoning limitationsEthernet switch support Reinstalling feature licensesDisconnecting the null modem cable CTP controls port lightsMihpto value CLI show.eventLog commandCLI threshold alerts EWS enhancementsNvram caching Changing password in CLIBBCredit Allocation for ports Robust large fabricsHSG80 transparent mode not supported with IBM AIX Known issuesFull-fabric capability for Edge Switch 2/12 WorkaroundSupport for speed Auto-Negotiate Snmp issues Ports may accumulate spurious events