Embedded Audit Log
The Audit log is a new log available through CLI and EWS. This is not the same Audit Log available through HAFM. The log records all configuration changes to the switch to provide data for analyzing problems caused by configuration changes.
Embedded Port Log
The Embedded Port Log is a new log that records all Fibre Channel traffic from or to the embedded port. This log is actually implemented as two logs, one that allows entry wrapping and one that stops adding entries when filled. The logs allow filtering based on Class F frames, as well as by port number, to isolate specific events or problems.
This feature is intended for advanced users to diagnose and troubleshoot traffic problems within a SAN. The Embedded Port Log is available via EWS, CLI, and HAFM.
Embedded Fabric Log
The
•Fabric Controller
•Path Selection
•Login Server
•Name Server
The Fabric log is actually implemented as two logs, one that allows entry wrapping and one that stops adding entries when filled. This log is intended to provide information for analyzing fabric and switch behaviors and problems. The Fabric log is available via EWS, CLI, and HAFM.
OSMS change
Open Systems Management Server (OSMS) is now available as a standard feature. OSMS can be enabled/disabled via EWS, Command Line Interface (CLI), and HAFM.
Default zone is disabled by default
The default zone on the Edge Switch 2/12, Edge Switch 2/24, and Edge Switch 2/32 is disabled by default. Zoning must be configured in order for any devices connected to the edge switches to communicate.
Some IP addresses must be avoided
If you use HAFM to manage other
16