14.At the Ready to label disk, continue? prompt, enter y and press Return.
At this point, the new partition table is written to the disk. If you view this disk’s Device Information in the SAN Manager LM administration application on a SAN Manager LM Windows NT node, the device will be listed with a Sun partition map.
15.At the partition prompt, enter q and press Return.
16.To partition another disk, choose disk from the format menu, press Return, and repeat steps 2 through 15, above.
17.When all disks are partitioned, exit the Format menu.
Storage Management
Preparing a Fibre Channel Disk for use with SAN Manager LM 25