HP Integrity Essentials Pack for Linux Software manual HP Smart Setup Ebsu Main Menu

NOTE: The entry Smart Setup EBSU (if configured) are not displayed in all EFI Boot Managers. If this entry does not appear, perform the steps detailed in “Accessing the Removable Media Devices Using EFI” (page 22).

3.The HP Smart Setup EBSU utility starts and displays the introduction screen. Press Enter to accept the default selection and continue.

The Main Menu is displayed, as shown in Figure 3-2.

Figure 3-2 HP Smart Setup EBSU Main Menu

NOTE: If there are I/O adapters installed on your system that Linux does not support, the list of unsupported adapters is displayed. In addition, you are warned that you can continue with the use of the HP Smart Setup EBSU utility, however, it could invalidate your HP service contract. For more HP Integrity server information, see the HP Business Support Center website:

http://www.hp.com/support/itaniumservers

4.If your HP Integrity server is cell-based (for example, a Superdome sx2000 server) or contains the zx2 chipset, execute this step; otherwise, continue to step 6.

The additional System Settings option appears on the Main Menu, as shown in Figure 3-3.

Figure 3-3 HP Smart Setup EBSU Main Menu with System Setting Option

26 Installing the OS and Updating the Server