HP Integrity Essentials Pack for Linux Software manual Configuring Storage Adapters

with the following line:

auth required pam_succeed_if.so quiet_success user ingroup sfcb

3.Restart SFCB by entering the following:

# /etc/init.d/sfcb start

Configuring Storage Adapters

The Configure Storage Adapters function in the HP Smart Setup EBSU utility requires that the EFI driver for the storage adapter be installed prior to configuring storage adapters. You must first select the Maintain Firmware function from the HP Smart Setup EBSU main menu to upgrade the adapters, thus installing the EFI driver. You can then proceed to use the Configure Storage function to set up your storage adapter.

Partitioning Fibre Channel HBA Adapters

Creating a partition using EBSU, or other partitioning tools, can result in the duplication of the created partition in multiple LUNs. Typically, this happens when there are redundant paths to the same storage device. For example, when you have two paths (A and B) to a storage device then two blocks bound to the original LUN are created. If you create a partition in the original LUN, it will be mirrored in the duplicated blocks.

For more details regarding configuring LUNs, see the HP StorageWorks: Booting Windows Server

2003 for Itanium-based systems from a storage area network application notes:

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00193929/c00193929.pdf.

To configure the boot LUN, see the “Configuring the HBAs“ section in conjunction with the “Cabling options for single-channel HBAs” section to create a zone/boot environment with only one LUN mapped to the boot HBA.

Installing the MPT Fusion HBA Driver on RHEL 5 and RHEL 5+ using a Xen Kernel Hangs the Server

After the MPT Fusion HBA driver is installed on a system running RHEL 5U2 using a Xen kernel, the server hangs during rebooting and the following messages are displayed:

ELILO boot: Uncompressing Linux... done

Loading file HP-initrd-2.6.18-92.el5xen.img...done

58 Known Issues