5 Installing and Using the HP Support Pack
This chapter provides instructions for installing and using the HP Support Pack. This contents of this software package must be installed after installation of the OS only.
Software Provided in the HP Support Pack
The HP Insight Foundation Suite for Integrity with Linux provides the following additional functionality and utilities for your Linux system in the HP Support Pack:
•“HP Management Base for Integrity Servers” (page 41)
•“HP Insight Management Agents” (page 41)
•“HP System Management Homepage ” (page 42)
•“HP Insight Management WBEM Providers” (page 42)
•“HP WBEM Providers for Linux” (page 42)
•“HP Partition Manager ” (page 42)
•“HP nPartition Commands” (page 42)
•“HP Array Configuration Utility – Command Line Interface” (page 43)
•“OpenPegasus ” (page 43)
•“HP Utilization Provider Including WBEM” (page 43)
•“HP SmartSetup Scripting Toolkit” (page 44)
•“HP SAS Integrated Raid (IR) Configuration Utility” (page 44)
•“HP Integrity Virtual Machines WBEM Provider” (page 44)
HP Management Base for Integrity Servers
HP Management Base for HP Integrity servers installs an Open IPMI driver appropriate for the target system and several utilities for Baseboard Management Controller (BMC) management. These items are needed by other management products, such as HP Insight Management Agents and HP WBEM Providers.
For information about HP Management Base, see hpbmc(8), hpuid(8), hpseld(8,), openipmi(4) and the HP Management Base Installation and User's Guide:
HP Insight Management Agents
Based on the Simple Network Management Protocol (SNMP), HP Insight Management Agents (HPIMA) allow you to remotely monitor configuration information and system status on your HP Integrity server from any SNMP browser. A central management server that uses HP Insight Manager ( or HP Systems Insight Manager) gathers and organizes the raw agent information from the browser for display in reports, allowing you to monitor system use and troubleshoot problems.
HP Insight Management Agents provide a broad spectrum of SNMP agents for the collection of server management data. This product includes SNMP extensions, data collection agents, and MIBs ported from the legacy "Compaq Insight Manager" product, such as Health, Host, Network Interface Card (NIC), Standard Equipment, Standard Information, Storage (including IDA, IDE, SCSI, and FC), and Threshold. The agents are handled by the HP Systems Insight Manager though they should work with any other management console applications that use SNMPv1.
You can obtain the latest version of HP Insight Management Agents by installing the downloaded HP Support Pack as described in “Obtaining the Latest HP Insight Foundation Suite for Integrity with Linux” (page 19).
Software Provided in the HP Support Pack | 41 |