HP UX System Management Software manual Cindex, Config

boot image	Boot content, including [WVI]INSTALL, [WVI]INSTALLFS, INSTCMDS or INSTCMDSIA,
	and other content needed to support boot, formatted for a specific media type such as CD,
	DVD, or tape.
bootsys	An Ignite-UXcommand that allows you to reboot and install clients that are currently running
	HP-UX. See bootsys(1M).
bundle	A package of software available from Software Distributor. Bundles are distributed within depots
	and contain products and filesets. Ignite-UXtypically references software at the bundle level, as
	opposed to product or product.fileset.

C

CD boot image A boot image formatted for a CD.

cfg clause See configuration clause.

check_net_recovery An Ignite-UXcommand that compares the files on a currently running system with a network recovery archive created by make_net_recovery. A report is generated showing those files that have been added, deleted, or changed since the recovery archive was created. See check_net_recovery(1M).

check_tape_recovery

	An Ignite-UXcommand that compares the files on a currently running system with a tape
	recovery archive created by make_tape_recovery. A report is generated showing those files
	that have been added, deleted, or changed since the recovery archive was created. See
	check_tape_recovery(1M).
CINDEX	An INDEX file for individual clients, kept in the /var/opt/ignite/client directory on the
	Ignite-UX server. Used to install recovery images made with make_net_recovery.
client	A computer that uses an Ignite-UX server for installation, recovery services, or both.
cloning systems	To replicate one computer’s software and configuration onto another. This can be accomplished
	to varying degrees using make_sys_image and make_[tapenet]_recovery.
cold install	Booting, loading HP-UX onto, and then starting a system. This process loads a new copy of
	HP-UX onto a system.
command line	Text formatted commands and options entered at an HP-UX command line prompt or executed
interface (CLI)	by a script.
common	System software you want replicated onto other systems, such as: an operating system, patches,
configuration	and application software.
compressed file	A file made smaller with compression software such as gzip or compress without losing any
	information. See gzip(1) and compress(1).
CONFIG	A file in the LIF volume that typically contains all the software configuration information and
	the default file system layout information. It includes default configuration information for the
	operating system release, user-defined configuration information, and information regarding
	archives and depots.
config file	See configuration file.
configuration	Defines a collection of related configuration files used to install or recover a system. You will find
clause	configuration clauses in the /var/opt/ignite/INDEX file for installations, and in the
	/var/opt/ignite/clients/MAC_address/CINDEX file for recoveries, on an Ignite-UX
	server.
configuration file	A file that contains information describing installation behavior, archive contents, or the contents
	of a depot. Configuration files are referenced by the INDEX and CINDEX files. See instl_adm(4).
copy_boot_tape	An Ignite-UXcommand that replicates a PA-RISC recovery tape made with make_tape_recovery.
	See copy_boot_tape(1M).
crippled config	See custom limited config.
custom	An installation tailored to your specific requirements, including: kernel parameters, the running
installation	of user-supplied scripts, host information, and networking information.
custom limited	A configuration file that informs Ignite there is no corresponding archive. Used with boot helper
config	media. Also called a crippled config.

34 Glossary