3.Install the
Procedure
#swinstall -s /dvdrom Ignite-UX
Common Errors
ERROR: Could not apply the software selection
Diagnosis: The DVD in the drive does not have
Correction: Unmount the DVD drive with this command:
# umount /dvdrom
Put in another OE DVD and mount it as in step 1c. Then use the swinstall command again.
ERROR: “server_name:/” 19 filesets have a version with a higher revision number already installed.
Diagnosis: A higher version of
Correction: Proceed to the next step.
Explore
You can list all the software bundles on the DVD with
#swlist -s /dvdrom
4.Unmount the DVD so you can extract it from the drive.
Procedure
#umount /dvdrom
Common Errors
# unmount /dvdrom: cannot unmount /dvdrom : Device busy
Diagnosis: A process is still using files on the DVD, or a process has its current working directory on the DVD.
Correction:
a.Run the fuser command to see what processes are using the DVD.
#fuser /dvdrom /dvdrom: 8553c
b.To find out what commands are using the DVD device, run the following command for each process id (numbers only, in this case 8553) shown by the fuser command.
#ps -e grep -e 8553
root | 8553 | 8552 | 1 | Jul 10 | pts/tb | 0:00 | |
root | 11087 | 8553 | 0 | 14:34:07 | pts/tb | 0:00 | grep |
In this case, the shell attempting to run unmount had /dvdrom as its current working directory, and changing to another directory would allow the DVD to be unmounted.
5.Create the
Install the