|
| Administration |
|
| Creating an Administrative Principal |
Step | 7. | Click OK. |
Step | 8. | On the Attributes tab, select the attributes for the administrative |
|
| principal. |
|
| • If this administrative principal requires the use of a hardware |
|
| authentication device, select the Require Preauthentication |
|
| attribute. |
Step | 9. | If necessary, click Apply. |
Step 10. From the Edit Menu, select Edit Administrative Permission. Select the permissions for the administrative principal. Click *All to select all principals. Click OK.
Step 11. Click Cancel to finish.
Chapter 6 | 125 |