HP UX Kerberos Data Security Software Using Groups to Control Settings, To edit the default group

Administration

Using Groups to Control Settings

		Using Groups to Control Settings
		You can modify the default values used for new principals in the
		Principal Information window. These default values are stored in a
		default group for the realm. Each realm has one default group.
		The values you specify for the default group are inherited by all new
		principals in that realm. A default group is similar to a template, that
		controls the settings for a new principal. This template is called
		default@REALM. It is automatically added to the principal database
		when a new realm is created.
		When adding or editing a single principal, you may elect to override the
		group’s default values. If the defaults set during installation are not
		what you commonly use for new principals, then edit the default group
		for the realm. Note that the settings for the previously created principals
		are not changed by editing the settings for the template.
		To edit the default group
Step	1.	In the kadminl_ui window, choose the Principals tab and select the
		realm.
Step	2.	Click New to open the Principal Information window.
Step	3.	From the Edit menu, choose Edit Defaults Group. The Group
		Information window appears.
Step	4.	Set the new default values in the General tab, the Password tab and the
		Attributes tab. The fields contained in these tabs are identical to the
		fields in the corresponding Principal Information tabs.
Step	5.	Close the Group Information window by clicking OK.
Step	6.	Close the Principal Information window by clicking Cancel.
		You can also edit the default group by selecting the default@REALM
		principal from the List of Principals on the Principals tab. Click
		Edit to open the Principal Information window, and then enter the
		information on the various tabs.

Chapter 6 155