HP UX Developer Tools manual 1054, 1055, 1056, 1057, 164

Diagnostic Messages

Error Messages

	CAUSE	The displacement for this instruction
		must be a constant expression.
	ACTION	Rewrite the instruction so that it uses
		a constant expression.
1054	MESSAGE	Unexpected items at end of
		line
	CAUSE	Legal operands are followed by
		trailing characters or operators.
	ACTION	Examine entire sequence of
		operations for syntactic integrity.
		Possibly insert a “;” to denote a
		comment after legal operands.
1055	MESSAGE	Label must be defined within
		a declared subspace
	CAUSE	Label is present before a .SUBSPA
		directive.
	ACTION	Place label after issuing .SUBSPA
		directive.
1056	MESSAGE	Poorly formed .DWORD argument
	CAUSE	The syntax for this .DWORD
		argument is invalid.
	ACTION	Consult the Assembler manual for
		the valid syntax.
1057	MESSAGE	Unexpected register symbol %s
		found in a constant
		expression
	CAUSE	A predefined register or a name
		defined by a .REG directive was
		encountered in a location where only
		an integer constant, a name defined
		by a .EQU directive, may occur.
	ACTION	Replace the predefined register or a
		name defined by a .REG directive by a
		constant, or change the .REG
		directive into a .EQU directive.

164 Chapter 8